umm guys chill out, this thread will be closed if a mod sees it. Trimble was just putting in his opinion based on what he has ran.

also on the comment about the v6, with the gears he was running he had way more torque than he should have to turn those tires. also hes in the middle of an engine swap so either ways it's taken care of.

 

 

I think you should take the fenders off and run 40s

 

we was just statin our opinions dillion.

 

x2 haha

 

yeah i know, and it really wasn't about you but Westn with the more personal attacks that have nothing to do with the thread. it was just a warning, i wonder why Westn got banned the first time.

also on a note more related to the thread, Trimble you said they would rub on the frame and torsion bars but both of them are running aftermarket wheels so that's probably why theirs aren't rubbing there if they're not.

 

Ummm or they are lying.

I've seen 4 bagers turning tractor tires has nothing to do with motor size. Gearing which I'm sure you have done yet.

Yes wheels can space the tires out but then you run into rubbing of the fenders. and if someone can read alittle better it says when i offroad your offroading might consist of puddle jumping and mall crawling no wonder you don't rub.

 

ha and that very well could be the case, i was giving them the benefit of the doubt.

 

Seriously, just run 40s

 

go ahead and hit the report button you bunch of thin skinned panzys....

 

seriously get a 4x4...

 

mine is mostly a mall crawler , but it does see offroad ever once in a while.......and yes mine rub the frame and my torsion bars at full lock , ive just learned not to turn it that deep.....

i got my 77 do go sink in a pond like trimble does his truck......

 

Yes pb that's right and at the time I had my 79 F250 4x4 to go mudding in....the dude who posted this thread wanted pics and we delivered. It seems everone else has the problem....

 

seems everyone has hijackd the op thread. thats ashamd. when the op wants to kno sumpn bout wat he wants to do to his truck and we tell him he can and yall bash us. u got b2therad with i thank bout 10in lift and 35s haha come on dude go to a 2wd topic and put in yer 2 cents. and dillion has i thank has 9in lift and 38s. and trimble in his mud hole monster truck with 20in lift and 40s at one time, wat a top heavy truck. and me and westtn with 3in lift and 37s, sounds like a bunch of jelous fellas to me...... so to the op u can have 37s with sum minor trimming.

 

i would like to put the 37s on...but i do offroad when i get a chance. so i think i might stick to 35s so i don't rub as bad...if i could get a little extra lift 4-6" then i would do it..i knew it would be tight with 37s just didn't know how bad..