37's on a 3" body lift
 

is this possible..has anyone done it..pics would be great

bigun72 is running that setup now

will have to track him down then lol

yeah hes doing it but he has his torsion bars maxed out too i believe

I really wouldn't suggest it. I would think it would rub alot.

Anything is possible with a sawsall.

Here you go...No sawzall used here..
http://i303.photobucket.com/albums/n...e/99b23abd.jpg

Wow, that is stuffed.

wow those are stuff in there..looks good but looks like there will be some rubbing

37's with a 3" body lift and t-bars cranked is rediculous.

i ran 36" tsl's on stock wheels with a 3" BL and t-bars cranked and still had to cut the plastic part of the bumper ALOT to avoid rubbing when offroading. And theres no trimming that you can do to the frame or torsion bars you will rub them too

fordz4life you might not have used a sawzall but you arent gonna be using your steering either, must be one of those straight line drag trucks???

biggun on here has a 3in. bodylift cranked torsion bars and runs 37's with aftermarket wheels. i can't remember if he said it scrubs.

yea mine rubbed , pics in album....... not enough to matter though....

dont talk crap about my setup

I'm "fords4life"..... had to use that name while I was banned haha....anyway it would rub at full lock but wasnt near as bad as you think..only regular trimming needed.....Its not nearly as outragous as running 44's with a v6 :eek::lol::lol::lol: now thats rediculous. :wave:
http://i303.photobucket.com/albums/n...e/99b23abd.jpg

trimble yer truck must have low stance. westtn had 35s on his truck with just a tbar crank and he barley rubd. and u say u rubd alot with a 3in bl and 36s haha

No funny video here anymore :)