Hey guys i have a 2007 F-150 4x4 SCREW with stock 20 Inch Rims

My buddy had a pair of 35 Inch toyo mud terrain tires in shop and thought i could throw them on ... I have already done a 2.5 Leveling kit to the front. I was wondering if i was going to have any issues due to rubbing or what not .

Any advice would be appreciated on what i have to do to make these work .

Thanks

 

They will probably rub on the upper control arm when making a hard turn due to the width of these tires. Wheel spacer's can correct the problem but usually not a good idea.

 

I agree. The problem is the OEM 20's have a lot of backspcing. This makes some aggressive MT tires touch the upper control arm/ball joint. Try one and see.

 

It can fit but not with 12.5" wide tires on the stock 6.30" BS wheel. I have 5.71" backspace on 20x9 wheels and they are 1/4" from the upper ball joint and rub the lower arm knuckles on full lock turns.

 

go with a 315/60/20 toyo thats what I did fit great and rub onlt at full lock

 

Thanks guys for all the advice helped out alot

Thanks again