Hey guys KMC HOss I want is a 20x9 with a 35.12.5 toyo mts

They come in

4.53 in backspacing -12mm offest
5.18 in backspacing 30 mm
5.71 in backspacing 18mm

Do you guys have any pics of any of these. I want to keep the wheels tucked in as muach as possible thought. Im going to get a 6" RCD lift on my 07 4x4. Im afraid 5.71 in would rub real bad. You guys pics and thoughts are appreciated

 

Compared to the OEM 17 and 18 inch wheels, a 9 inch wide wheel...
with 4.5 inches of bs will stick out about 2.5 inches farther
with 5.1 inches of bs will stick out about 2 inches farther
with 5.7 inches of bs will stick out about 1.5 inches farther

 

Thanks wandell I have the oems 20s on here. Dont they 5.5" backspacing

 

Yeah, but since you're going from a 7.5" wide wheel to a 9" that's where you get your 1.5"s.

 

The reason I gave specs compared to the OEM 17's and 18's is because the OEM 20's are different. I know they are wider than 7.5 inches (maybe 8.5??) and I'm not sure if they have the same 5.5 inches of bs as the 17's and 18's.

 

u guys have any pics of the ones with 5+ in of backspaing

 

https://www.f150online.com/galleries....cfm?gnum=9134

They are 22s on 37s with 5.71.. Here you go.

 

4.53 backspacing here

 

anybody with 5.2, would I be better off just goin with the ones with the 5.71 and add a wheel spacer if I need it or just go ahead and go with 5.18 in. Remember I want to keep them tucked in as far as possible with my rcd lift. Thanks