36 x 14.75 x 18 tires with 6" lift
#1
36 x 14.75 x 18 tires with 6" lift
I have a 2005 4x4
So I am hoping to get a 6" fabtech lift.
The tires I've got my eye on are 375/60R18 MT Baja Claw Radials. See Here
I'm just wondering what 18" wheel will work best with these. Moreso wondering the dimensions for backspacing and offset that I would likely have the least problems with.
Or is it even possible with a 6" lift, would I need a little more lift?
Any thoughts on the combination?
Thanks!
So I am hoping to get a 6" fabtech lift.
The tires I've got my eye on are 375/60R18 MT Baja Claw Radials. See Here
I'm just wondering what 18" wheel will work best with these. Moreso wondering the dimensions for backspacing and offset that I would likely have the least problems with.
Or is it even possible with a 6" lift, would I need a little more lift?
Any thoughts on the combination?
Thanks!
#2
#4
#5
Originally Posted by wandell
I think you need more lift. As for a wheel, I'd want at least a 10 inch wide wheel with a tire that wide. As for backspacing, I'd stay around 5.5 inches.
Originally Posted by djh1121
I believe u would rub. You could either get the Fabech coil-overs and crank them up a little or a body lift. You could add a spacer, but I'm not telling u to do that. It’s your call...
Wandell, your knowledge is always appreciated.
Thanks for the ideas dj, I was going to get the kit with the coil-overs.