what type/brand of electric fans are people using?
#16
08-11-2000, 07:45 PM
Over at www.blueovalnews.com there is talk of Ford putting in electric fan clutches on 2003.
It would engage the fan to the water pump pulley as needed.
It would engage the fan to the water pump pulley as needed.
#17
08-11-2000, 08:17 PM
Matt90GT,
I hope this thread will answer most of your questions: https://www.f150online.com/f150board...ML/001026.html
Flexalite kit came with a thermostatically controlled fan switch and an A/C relay.
After installation, it fits well. Flexalite specifies that coverage must be a minimum of 70% and I'm sure it's that--I'd guess 85-90%.
I've posted pictures at:
http://albums.photopoint.com/j/Album...2727&a=8633174
[This message has been edited by gofish (edited 09-10-2000).]
I hope this thread will answer most of your questions: https://www.f150online.com/f150board...ML/001026.html
Flexalite kit came with a thermostatically controlled fan switch and an A/C relay.
After installation, it fits well. Flexalite specifies that coverage must be a minimum of 70% and I'm sure it's that--I'd guess 85-90%.
I've posted pictures at:
http://albums.photopoint.com/j/Album...2727&a=8633174
[This message has been edited by gofish (edited 09-10-2000).]