CAT's Split
Member
Joined: Jun 2006
Posts: 63
Likes: 0
From: FL
Try the warantee stuff first. Free is always a good place to start. If no success, any good muffler shop can weld a crack. I welded my son's ranger cat that had two 6 inch cracks about 4 months ago. Still no leaks.
Thread Starter
|
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Originally Posted by peacjt
Try the warantee stuff first. Free is always a good place to start. If no success, any good muffler shop can weld a crack. I welded my son's ranger cat that had two 6 inch cracks about 4 months ago. Still no leaks.
Theres an idea
200,000 on these cats - actually , more like 250,000 , that's how many miles are on the truck . New Motor in 01 , warranty
Warranties up I'm afraid , But that's good to know F151 - I wasn't aware of the cat warranties..
Thanx
Thread Starter
|
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Originally Posted by Kevin24
jbrew,i think what built54 means is that if you replace your 4 stock cats with 2 high flows you will not get a CEL and do not need eliminators?That is what everyone normally does cut them all out.The high flows eliminate the need for 4.
oh cheack out prices at www.performancepeddler.com
If you are a new customer there submit a reasonable best offer and it should get accepted.No shipping charges and they shipped my stuff very fast.
oh cheack out prices at www.performancepeddler.com
If you are a new customer there submit a reasonable best offer and it should get accepted.No shipping charges and they shipped my stuff very fast.
Last edited by jbrew; May 31, 2007 at 05:49 AM.