I've searched almost Everywhere and to no avail... no powerpullies for the 4.2. BUT i KNOW some of you v6 guys out there have them and I would like to know where I can get them!!!... perty pleease...

thanks for any info.

------------------
TRUCK
White 00' XLT 4.2 Auto Sport
Regular cab Styleside[*]Superchip[*]Airaid FIPK[*]Gutted MAF[*]Custom Ported STOCK Throttle Body
1/4... 17.221@81.35MPH
Truck Pictures

PC
Thunderbird 1.1ghz @ 1.33ghz
Abit KT7A-Raid
384mb Kingmax PC-150 ram
60gig IBM 75gxp RAID array
Geforce2 GTS 64mb
19" KDS Avitron Flatscreen

 

Are you ready for some bad news?The power pullies that are available for the 4.2 only fit the 97 and 98s. Ford changed something on the later years so the pullies won't fit.

[This message has been edited by lightningcrashz (edited 05-20-2001).]

 

What changed between the 98 to 99 is the harmonic balancer. The 97 and 98 4.2s use a two peice balancer and pully, the 99 and up 4.2s use a one peice balancer/pully unit. There is an underdrive pully for the 99 and up mustang 3.8 but the balancer its self is balanced diffrent from the 4.2's balancer. It will fit onto the 99 and up 4.2 but it causes a massive vibration in the engine(experience talking, I already tried to put one on my truck). Hopefully ASP will very soon have an underdrive pully for the 4.2, but I wouldnt my breath.

------------------
99 F-150 4.2L
True duals W/Magnaflows
Jacobs Ignition
K&N filtercharger
Custom programed chip
throttle body spacer
ported&polished throttle body
ported mass air flow sensor
Black Magic electric fan
Belltech rear sway bar
belltech 3/4 drop
Centerline Scorpion 17x9.5
Nitto 275/50/17 extreme 450

 

AAAAARRRRRRRRRGGGGGGGGH!

------------------
TRUCK
White 00' XLT 4.2 Auto Sport
Regular cab Styleside[*]Superchip[*]Airaid FIPK[*]Gutted MAF[*]custom Ported STOCK Throttle Body
<A HREF="http://www1.eboard.com/eboard/servlet/BoardServlet?ACTION=NOTE_SHOW&ACTION_ON=NOTE&OBJEC T_ID=362221&SITE_NAME=Destination&BOARD_NAME=sandr apics" TARGET=_blank> </A>
1/4... 17.221@81.35MPH

PC
Thunderbird 1.1ghz @ 1.33ghz
Abit KT7A-Raid
384mb Kingmax PC-150 ram
60gig IBM 75gxp RAID array
Geforce2 GTS 64mb
19" KDS Avitron Flatscreen

 

ASP emailed me back to say if they had a order for 100 pulleys. they would put them production if we can get 98 more people with a 99 or newer 4.2 to order we can get ours

 

well now you need only 97 because I WANT THEM BAD!!!!!!

 

It's too late for the 100 people. The pullies are already on their way. What I said about the 99-00 Mustang 3.8 pully would fit onto the 4.2 but caused a major vibration is beacuse the 99-2000 mustang 3.8L is externaly balanced by the dampner. The 99-new F150s are internaly balanced by the crankshaft, so is the 2001-new mustang 3.8L. Within the past month or so ASP has announced that they are designing an underdrive pully for the internaly balanced 3.8L/4.2L V6 engines. I have not herd of a relese date yet, but they are on their way.

 

F150 freak, I was just surfin the net today and stumbled onto the same thing you just brought up.Now if only I can remember where it was at.

 

Ok.. So there are already pullies for the '97 4.2l.. where would I be able to find them on the net? Thanks in advance...

------------------
1997, F150, 4x2, 4.2l, 5 speed manual, Pacific Green/tan, 2 chamber flowmaster, 265/75/16 Wrangler GSA, Kenwood 7009 Mask, KYB shocks, 300 watt Sherwood amp, single Rockford Fosgate 12in Sub