V6 Triton emblem????
Thread Starter
|
Senior Member
Joined: Jan 2000
Posts: 188
Likes: 0
From: canada, quebec
V6 Triton emblem????
O.k its not a Triton but I'm not one to lie so I made this emblem myself. What do you think?
------------------
1997 4x4 XLT 4.2l ORP 5-speed
For more details and pics please see my site...Thanks
www.eph1fifty.cjb.net
Senior Member
Joined: Sep 1999
Posts: 215
Likes: 0
From: The First State
The 4.2 is SPI....split port induction
------------------
98 XL 4.2L
Black/Silver
Shortbed
5-speed
Pendaliner bedliner
flushmount tonneau
ASP underdrive pulley
Gibson split duals
Clarion CD player
Wish list....
JBA or Gibson headers
Autometer Tach and Pod
Airaid
------------------
98 XL 4.2L
Black/Silver
Shortbed
5-speed
Pendaliner bedliner
flushmount tonneau
ASP underdrive pulley
Gibson split duals
Clarion CD player
Wish list....
JBA or Gibson headers
Autometer Tach and Pod
Airaid
Senior Member
Joined: Aug 1999
Posts: 1,565
Likes: 1
From: Columbus, Georgia
4byFord
That looks nice!
------------------
2000 F-150 XLT, 4x2, Superchipped 5.4L Supercab, Styleside, Black with silver two-tone, 3.55 rear, class III towing package with heavy duty cooling package, 4 wheel disk ABS, overhead console, sliding rear window, keyless entry, dark graphite interior, in dash CD, factory leather wrapped steering wheel, Pendaliner bedliner, K&N air filter, rubberized undercoating, cabin filtration system, Bugflector II, 5W-30 Mobil 1, engine build 10/4/99
[This message has been edited by Dustoff (edited 04-02-2000).]
That looks nice!
------------------
2000 F-150 XLT, 4x2, Superchipped 5.4L Supercab, Styleside, Black with silver two-tone, 3.55 rear, class III towing package with heavy duty cooling package, 4 wheel disk ABS, overhead console, sliding rear window, keyless entry, dark graphite interior, in dash CD, factory leather wrapped steering wheel, Pendaliner bedliner, K&N air filter, rubberized undercoating, cabin filtration system, Bugflector II, 5W-30 Mobil 1, engine build 10/4/99
[This message has been edited by Dustoff (edited 04-02-2000).]
Trending Topics
Senior Member
Joined: Jan 2000
Posts: 134
Likes: 0
From: Dallas,Texas,USA
Looks good I wouldn't mind having a plate like that instead of the just having the plain jane xl plate. Very creative 4byFord!
Snow White
------------------
2000 150 sport solid white, K&N filterpack the rest is still stock....for now anyway!
Snow White
------------------
2000 150 sport solid white, K&N filterpack the rest is still stock....for now anyway!
Senior Member
Joined: Apr 2000
Posts: 200
Likes: 0
From: Canada
Its easy to make and took me about 20 minuts to do, here is how:
(1) Get my artwork and send it to a vinyl plotter guy to have him cut it out on a small sheet of "chrome mylar" vinyl. This vinyl sheet is very thin and has a sticky side. Shouldn't cost more than 5 bucks to do.
(2) Find a sheet of plastic (polystyrene) about 1/8" thick and apply the new SPI logo onto the plastic sheet. VERY CAREFULY, cut around the "chrome" square with a ruler and a exacto knife. Make small (not deep) cuts as to be more precise.
(3) By now you will hav two emblems, paint the sides flat black with a #2 or #3 brush. Take your time and don't paint over the chrome sticker!
(4) Get some 2 sided 3M tape and apply a band to cover the whole surface. Need I mention the opposite side of the chrome? Nanh!
(5) Clean your truck and apply the new badges under the F-150 logo like the Triton emblems!
(6) Walk away backwards (be carefull not to trip on anything) and proudly stare at your nice job
Since I installed my emblems, I went to car washes etc.. And no problems.
If you want my artwork, email me here at: eph1fifty@hotmail.com and I will send you a Corel-Draw artwork (plotter guys use this software) I use Illustrator 8.0 for you other designers out there!
(1) Get my artwork and send it to a vinyl plotter guy to have him cut it out on a small sheet of "chrome mylar" vinyl. This vinyl sheet is very thin and has a sticky side. Shouldn't cost more than 5 bucks to do.
(2) Find a sheet of plastic (polystyrene) about 1/8" thick and apply the new SPI logo onto the plastic sheet. VERY CAREFULY, cut around the "chrome" square with a ruler and a exacto knife. Make small (not deep) cuts as to be more precise.
(3) By now you will hav two emblems, paint the sides flat black with a #2 or #3 brush. Take your time and don't paint over the chrome sticker!
(4) Get some 2 sided 3M tape and apply a band to cover the whole surface. Need I mention the opposite side of the chrome? Nanh!
(5) Clean your truck and apply the new badges under the F-150 logo like the Triton emblems!
(6) Walk away backwards (be carefull not to trip on anything) and proudly stare at your nice job
Since I installed my emblems, I went to car washes etc.. And no problems.
If you want my artwork, email me here at: eph1fifty@hotmail.com and I will send you a Corel-Draw artwork (plotter guys use this software) I use Illustrator 8.0 for you other designers out there!
Member
Joined: Aug 2000
Posts: 43
Likes: 0
From: Citronelle,AL,USA
try mustangparts.com they have a cool V6HO badge and lots of other nifty stuff.
------------------
1999 F150 4x4 sport package,4.2 V6
planning lots of mods
So far:Panasonic in dash off road CD player, 85 watt driving lights, diamond blue headlights 55 low 100 high, 55 watt driving lights on rear, added switch panel above radio (chrome!), added fuse box for new acc., floormats, Class III reciever
Favorite mod so far:
Coconut air-freshener
------------------
1999 F150 4x4 sport package,4.2 V6
planning lots of mods
So far:Panasonic in dash off road CD player, 85 watt driving lights, diamond blue headlights 55 low 100 high, 55 watt driving lights on rear, added switch panel above radio (chrome!), added fuse box for new acc., floormats, Class III reciever
Favorite mod so far:
Coconut air-freshener
Senior Member
Joined: May 2000
Posts: 1,007
Likes: 0
From: liquid sunshine state (oregon)