Fuel/emissions line OK to use as vacuum line?
#1
07-27-2009, 02:58 PM
Join Date: Mar 2005
Location: St. Joseph, MI
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Fuel/emissions line OK to use as vacuum line?
OK, I went to Autozone to get a vacuum line for my truck.
The kid said " I don't have that large of hose, this should work"
then cuts a length of Fuel/emissions line (rated 50 psi) Can this be used in place of my vacuum hose?
Having a hard time getting this vacuum leak squared away and just don't want something to add to the problem.
Thanks,
The kid said " I don't have that large of hose, this should work"
then cuts a length of Fuel/emissions line (rated 50 psi) Can this be used in place of my vacuum hose?
Having a hard time getting this vacuum leak squared away and just don't want something to add to the problem.
Thanks,
#2
07-28-2009, 11:16 AM
Join Date: Mar 2005
Location: St. Joseph, MI
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
OK, The hose seems to work fine.
I did find a large hole in the rubber elbow that runs under the intake in the front of the motor. Just put electrical tape around it till I can get to the Ford dealer and get a new molded one. (bend is to tight to just use the standard hose.)
Just thought I would let everyone know it seems to work fine.
I did find a large hole in the rubber elbow that runs under the intake in the front of the motor. Just put electrical tape around it till I can get to the Ford dealer and get a new molded one. (bend is to tight to just use the standard hose.)
Just thought I would let everyone know it seems to work fine.
#3
07-28-2009, 05:15 PM
NOT IN MY TRUCK!
#4
07-29-2009, 09:32 AM
Join Date: Mar 2005
Location: St. Joseph, MI
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts