question
You don't need to pay someone for that. Its an easy job. All you need is an impact gun, a jack, and some blocks. As long as the mounts aren't rusted anyway. If you elect to pay someone, don't be suprised to find it at about $60 an hour, and those who know how to do it can do it in about 2 hours. Also, I would go with a three inch body lift. The body sits on 1 inch rubber bushings, so a 2 inch is only realistically going to give you 1 inch of lift. Sometimes with 2 inches, and always with three inches you'll need to "adjust" the shifter. If you don't drop the transfer case, you might get a driveline vibration. There's a lot of little "add ons" that can make it take longer, but you won't have teo shell out a few hundred bucks to get it installed.


