well i dont know much about superchargers and stuff so i figured i would ask yall!.... i have an AF1 CAI, exhaust, and underdrive pullies.... would it be possible to reach 600hp if i got a programmer and a supercharger?? thanks guys...

 

Programmer with a custom dyno tune, pullied up supercharger, twin 255lph fuel pumps, 60# injectors, custom exhaust, and you might make 600hp for a little while before you make a window in your engine block.

 

with that those mods alone, NO..

with alot more money possibly.... any thing is possible with alot of money..

 

Get a built motor. The 3valve 5.4L will not hold up to that much power for long especailly if your looking for 600HP @ the wheels! Better off spending your money on a built motor, then throwing the other power adders on her!

 

only person i saw that was close was Rafa's truck, and he spent alot of cash.

 

you will snap a connecting rod thats for sure.

 

Like they all said,,,with just a supercharger and a custom tune.Not gonna make 600 and keep it together for more then a day or two!
You would need to start with a built block and build from there.

Phil

 

Wow weazel,,,,you haven't been looking to hard.

You don't get a 6000 pound truck in the 11s with 4 or 500 HP!

Phil

 

im just under 500hp at the wheels without nitrous. that puts me right at 600 crank

 

will you list me all your performance mods please!?

 

Im right 420 at the wheel add in a 30% drivetrain loss and the 50-70 hp its costing me to run the supercharger and I'm right at 600 at the crank.

 

lol... i recall rafa's truck making 540 or something, but i was refereeing the to the 3V's, i knew your truck and some other 2v's are beefed up!

 

you cant figure in the 50-70 hp loss for the s/c for your actual crank hp.

 

I guess it would be accurate to say that the stresses his crankshaft is experiencing would amount to 600hp.

 

whoops right you are