Let me know if you need a vented box for a single 12" in an extended cab.

-AR

 

Jackal
What about that box for a single 12?

 

It replaces the "40" in the 60/40 split rear bench. Fits EXACTLY perfect behind the driver's seat. It's 2.5^3 ft. with a 20 sq. in vent tuned to 35 Hz. Countersunk screws every 2", sealed the seams, of course, and carpeted to match the interior. My local shop wanted $360 to make it w/o carpet. It includes the 5" feet which cost about $25. I have a full spec sheet I can email. I only want $160, but shipping is about $35. Only used for a week, then I built a larger box, not near the quality of this one. You can see pics of my "junk" box in my sig. on page 2.

BTW, the box uses machine screws and "T-Nuts" forget drywall screws!!! Completely reusable, and it weighs 48 lbs.

-AR

 

RTZracer, please post some pics! I'd love to see that setup.

 

Sorry it took me soo long to get back with pics, i totally lost this post =)