So my rear speakers work very oddly.
If i set my fade to only he back and my balance ALL THE WAY RIGHT OR ALL THE WAY LEFT, my two back speakers work perfecly fine. But if i set the balance to 0 is all weird and messed up.

So i though changing the speakers would work...
and i was wrong, they still do it
hey are really holding my sysem back

 

Is this a stock system? If not something is wired wrong or you used a summing LOC also wired wrong.

 

No it's aftermarket
At what level is the wiring wrong
Cause I'm not good enough to take slot apart

 

It sounds like you have the negative from each rear speaker mixed up at the head unit. Switch the two negative wires and keep the positive wires connected the way they are.

 

i took my head unit out and started playing around and its fixed
now my system acually sounds pretty bad ***!
Thanks guys!!!