For the people whosaid it wouldnt work....
#1
For the people whosaid it wouldnt work....
OK you guys might remember a while ago i had a 5-8 pg topic about people saying my sub wouldnt work under my seat.
well this is the biusness i want to get into so here you go.
about 1/2 way trough it
no bottom just checking if it fit
i got the bottom on i had to use a router on the bottom so the magnit will fit.
but i got it to fit this is with the bottom on.
so then i went to walmart and go some carpet..
here it is finished
this is my very first box and it turned out good and this is the only F-150 that i have seen with a solo baric L5 under there seat...
well this is the biusness i want to get into so here you go.
about 1/2 way trough it
no bottom just checking if it fit
i got the bottom on i had to use a router on the bottom so the magnit will fit.
but i got it to fit this is with the bottom on.
so then i went to walmart and go some carpet..
here it is finished
this is my very first box and it turned out good and this is the only F-150 that i have seen with a solo baric L5 under there seat...
Last edited by dumontdude10; 04-09-2009 at 05:38 PM.
#5
#6
#7
Trending Topics
#8
#9
#10
I would not have done it because :
1 - it is a kicker sub
2 - it is a square kicker sub
3 - the mounting depth is going to cause problems with the surround on the sub during high excursion times.
4 - riding around with the seat up is lame !
5 - first time you park somewhere and forget to put the seat down, someone is going to relieve you of it.
6 - What about if someone ever rides back there and sits above it....not good.
Sorry..... IMO waste of money. It pays to do some research before you pull the trigger and spend 400 bucks. If you want kudos for cramming that under there... you are not going to get it from me.
#11
i didnt put any poly in it.. but i did calculate the volume of air (i cant remember what it was) but there was enuff the sub needed .66 CU.ft and i had .77 CU.ft
#12
X3
I would not have done it because :
1 - it is a kicker sub
2 - it is a square kicker sub
3 - the mounting depth is going to cause problems with the surround on the sub during high excursion times.
4 - riding around with the seat up is lame !
5 - first time you park somewhere and forget to put the seat down, someone is going to relieve you of it.
6 - What about if someone ever rides back there and sits above it....not good.
Sorry..... IMO waste of money. It pays to do some research before you pull the trigger and spend 400 bucks. If you want kudos for cramming that under there... you are not going to get it from me.
I would not have done it because :
1 - it is a kicker sub
2 - it is a square kicker sub
3 - the mounting depth is going to cause problems with the surround on the sub during high excursion times.
4 - riding around with the seat up is lame !
5 - first time you park somewhere and forget to put the seat down, someone is going to relieve you of it.
6 - What about if someone ever rides back there and sits above it....not good.
Sorry..... IMO waste of money. It pays to do some research before you pull the trigger and spend 400 bucks. If you want kudos for cramming that under there... you are not going to get it from me.
2. true
3. was no true
4. is not true
5. im not gunna forget
6. and my dad sits back there al the time on that seat and the seat dosent touch the sub at all.
7. it wasnt a waste of money and i did research it
Last edited by dumontdude10; 04-09-2009 at 05:39 PM.
#13
7. it wasnt a waste of money and i did research it and i dont really care if i get ur kudos u know its cool and ur just jelious that my system is better then yours and you could never build a box like mine to fit a kicker............................................ .....................................
Seriously, its cool that you got it to fit man congrats.
But the positives really end there. You might fascinate a few dumbfounded people at the local high school but thats about it.
#15
X3
I would not have done it because :
1 - it is a kicker sub
2 - it is a square kicker sub
3 - the mounting depth is going to cause problems with the surround on the sub during high excursion times.
4 - riding around with the seat up is lame !
5 - first time you park somewhere and forget to put the seat down, someone is going to relieve you of it.
6 - What about if someone ever rides back there and sits above it....not good.
Sorry..... IMO waste of money. It pays to do some research before you pull the trigger and spend 400 bucks. If you want kudos for cramming that under there... you are not going to get it from me.
I would not have done it because :
1 - it is a kicker sub
2 - it is a square kicker sub
3 - the mounting depth is going to cause problems with the surround on the sub during high excursion times.
4 - riding around with the seat up is lame !
5 - first time you park somewhere and forget to put the seat down, someone is going to relieve you of it.
6 - What about if someone ever rides back there and sits above it....not good.
Sorry..... IMO waste of money. It pays to do some research before you pull the trigger and spend 400 bucks. If you want kudos for cramming that under there... you are not going to get it from me.
1. is not true
2. is not true
3. was no true
4. is not true
5. im not gunna forget
6. and my dad sits back there al the time on that seat and the seat dosent touch the sub at all.
7. it wasnt a waste of money and i did research it and i dont really care if i get ur kudos u know its cool and ur just jelious that my system is better then yours and you could never build a box like mine to fit a kicker............................................ .....................................
2. is not true
3. was no true
4. is not true
5. im not gunna forget
6. and my dad sits back there al the time on that seat and the seat dosent touch the sub at all.
7. it wasnt a waste of money and i did research it and i dont really care if i get ur kudos u know its cool and ur just jelious that my system is better then yours and you could never build a box like mine to fit a kicker............................................ .....................................
2. He said its a square kicker sub. You said its not true. So your saying its not a square kicker sub?
3. Not having sufficent space between the magnet and the bottom of the box will cause rips and tears in the surround over time, especially if you crank it a lot.
4. Yes, it is lame.
5. Yes, it will happen. I probablly have 4 or 5 kids a week come in and say that something or other got jacked out of their car, wether it be their face plate or whoel radio or their amp and subs or the sleeves off their sweet metal mullisha jersey...
6. How do you know the sub isnt hitting the seat? Just because you cant feel it doenst mean that its not happening.
So in short, you fail. Epically. Congrats for making it fit under there. Doesnt change the fact that you have a serious attitude problem and pretty much suck at life.