what is your sub configuration? PICS?

Thread Tools
 
Search this Thread
 
  #1  
Old 05-15-2008, 08:56 PM
basadochi04's Avatar
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Panama city, Fl
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
what is your sub configuration? PICS?

I just want to see pics of other scabs and screws. underseat or seat removed. just want to get and idea of what others are running in these trucks. I just want nice clean hitting bass that will hit 140-150 on the dash when the gain is turned up, but still sound good and clean at lower volumes when cruizing. A buddy of mine is running 2 15 L7s in a vented and chambered custom box in the back of his accord and is hitting 149.4 on the dash. I just dont like kicker, i like JLaudio and Alpine. Input would be greatly appreciated.
 
  #2  
Old 05-15-2008, 09:43 PM
Join Date: Jan 2007
Location: South Texas
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
3 12s

im running 3 12" pioneer subs under the rear seat of my supercab. sounds awesome. i had to make a 4" seat lift and also made the box. i would post some pics but as you might know FTW is down and i cant seem to find my pics anywhere. Ill get some pics tomorrow and post them.
 
  #3  
Old 05-16-2008, 12:37 AM
bigguy02's Avatar
Member
Join Date: May 2008
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by basadochi04
I just want to see pics of other scabs and screws. underseat or seat removed. just want to get and idea of what others are running in these trucks. I just want nice clean hitting bass that will hit 140-150 on the dash when the gain is turned up, but still sound good and clean at lower volumes when cruizing. A buddy of mine is running 2 15 L7s in a vented and chambered custom box in the back of his accord and is hitting 149.4 on the dash. I just dont like kicker, i like JLaudio and Alpine. Input would be greatly appreciated.
the box more then the sub is gonna do it for ya. if you want a nice ported one and you have never done it you might want to get someone to build it for ya. or check the12volt.com lots of good info there. but 3 w6's should get you there or two w7's or if you want to spend a little bit of money check out the Critical Mass UL12 its a bad bitch. but takes lots of power but one should get you there and it weighs only 13 pounds
 
  #4  
Old 05-16-2008, 09:00 AM
Blackhawk68's Avatar
Senior Member
Join Date: Aug 2005
Location: Arkansas
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
check out RE audio and Fi audio. a buddy of mine has a 15" Fi in a ported probox in his trunk, and that thing will bump. litterally moves his roof up and down about a half inch
 
  #5  
Old 05-16-2008, 06:54 PM
Join Date: Jan 2007
Location: South Texas
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
pics

here are 2 bad pics from my phone

 
  #6  
Old 05-16-2008, 09:25 PM
1bad86vmax's Avatar
Senior Member
Join Date: Dec 2006
Posts: 467
Likes: 0
Received 1 Like on 1 Post
Here is mine . 3 MTX amps and 4 RF P3 12's , behind the rear seat of my 2001 Screw .




 
  #7  
Old 05-16-2008, 10:25 PM
mark03screw's Avatar
Senior Member
Join Date: Jan 2007
Location: Alberta
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
how the heck did you fit that behind the seat?? i could barely fit my 10" kicker.
 
  #8  
Old 05-16-2008, 10:40 PM
abervintageman4's Avatar
Senior Member
Join Date: Dec 2007
Location: the woodlands tx
Posts: 1,730
Likes: 0
Received 0 Likes on 0 Posts
because that is probaly fiberglass, and fiberglass is not as thick as mdf
 
  #9  
Old 05-17-2008, 12:18 AM
fdimeroller's Avatar
Senior Member
Join Date: Feb 2008
Location: SC
Posts: 2,084
Likes: 0
Received 1 Like on 1 Post
1 15" RE SX powered by a JBL GTO 1201.1 mono. Jus replaced the amp wit a USAmps XT4000D so i can run @ 1 ohm and run the same brand.






wires arent like that anymore btw
 
  #10  
Old 05-17-2008, 06:58 AM
tre fizzle's Avatar
Junior Member
Join Date: Nov 2007
Location: Las Vegas, NV
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by taylorbridges35
here are 2 bad pics from my phone

can u show me a lil more bout what youve done with your center console? i want to make it my sub box or build one that will fit in it and it looks like u have the same console from the back..
 
  #11  
Old 05-17-2008, 09:35 AM
1bad86vmax's Avatar
Senior Member
Join Date: Dec 2006
Posts: 467
Likes: 0
Received 1 Like on 1 Post
Originally Posted by abervintageman4
because that is probaly fiberglass, and fiberglass is not as thick as mdf
My box is made out of 3/4" MDF .




Here is my gallary.

https://www.f150online.com/galleries....cfm?num=12527
 

Last edited by 1bad86vmax; 05-17-2008 at 10:11 AM.
  #12  
Old 05-17-2008, 09:40 AM
Screw-Me-05's Avatar
Senior Member
Join Date: Feb 2007
Location: Native New Yorker
Posts: 3,329
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 1bad86vmax
Here is mine . 3 MTX amps and 4 RF P3 12's , behind the rear seat of my 2001 Screw .




Damn bro nice setup.........
 
  #13  
Old 05-18-2008, 01:04 AM
king ranch's Avatar
Senior Member
Join Date: Apr 2007
Posts: 701
Likes: 0
Received 0 Likes on 0 Posts
how much airspace does that box have total net
 
  #14  
Old 05-18-2008, 12:25 PM
1bad86vmax's Avatar
Senior Member
Join Date: Dec 2006
Posts: 467
Likes: 0
Received 1 Like on 1 Post
Originally Posted by king ranch
how much airspace does that box have total net
Who's box are you referring to ? If your asking about mine , each sub gets .75 cubic feet of air space . Total box would be 3.0 cubic feet .
 
  #15  
Old 05-18-2008, 03:53 PM
my05fx4's Avatar
Member
Join Date: Feb 2008
Location: Clover, SC
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
1bad86vmax, VERY cool setup! I sure wish I had room behind my seat like that!
 


Quick Reply: what is your sub configuration? PICS?



All times are GMT -4. The time now is 04:08 PM.