Pioneer Low Pro Sub
Pioneer Low Pro Sub
Has anyone tried to heard the Pioneer Low Profile Sub. There are showing a mounting depth of roughly 4" for a 12" sub. Sounds like a perfect fit for a screw!!
Features
Size 12"
Woofer Cone Material IMPP Composite Cone
Surround 3-Layer Fiber Woven Radial
Voice Coil 4 Layer, Long Voice Coil
Voice Coil Bobbin Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Strontium
Basket Design Cast Aluminum Basket with Fin-Shaped Design
Gasket Rubber
Wire Terminals Spring Compression
Specifications
Watts MAX. Music Power 1400W
Watts Nominal Power Handling 350W
Frequency Response 18-1,000Hz
Sensitivity 88dB
Ohm Rating 4
Recommended Enclosure 0.5-1.0Cubic Feet
Features
Size 12"
Woofer Cone Material IMPP Composite Cone
Surround 3-Layer Fiber Woven Radial
Voice Coil 4 Layer, Long Voice Coil
Voice Coil Bobbin Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Strontium
Basket Design Cast Aluminum Basket with Fin-Shaped Design
Gasket Rubber
Wire Terminals Spring Compression
Specifications
Watts MAX. Music Power 1400W
Watts Nominal Power Handling 350W
Frequency Response 18-1,000Hz
Sensitivity 88dB
Ohm Rating 4
Recommended Enclosure 0.5-1.0Cubic Feet
Well I heard them in some kid's truck a while ago, but the kid who put them in, built the box very poorly. They didn't sound very good.
On the other hand, the Premier sub I run in my truck sounds great.
I would say give them a shot and see what you think. People around here are idiots, so I don't trust what I hear from their stereos. I like Pioneer and I would like to hear what someone competent has to say about those shallow mount subs.
On the other hand, the Premier sub I run in my truck sounds great.
I would say give them a shot and see what you think. People around here are idiots, so I don't trust what I hear from their stereos. I like Pioneer and I would like to hear what someone competent has to say about those shallow mount subs.


