Subwoofers
Senior Member
Joined: Apr 2005
Posts: 164
Likes: 0
From: Rowlett, TX
Originally Posted by 04FX4MG
i have someone who wants to sell me two RE 10's for $100. are these any good? also what is the website where i can check the specs on these?
Senior Member
Joined: Feb 2006
Posts: 187
Likes: 0
Originally Posted by Rider69
They are very good for the money
Senior Member
Joined: Apr 2005
Posts: 164
Likes: 0
From: Rowlett, TX
I just sent you an email
Originally Posted by 04FX4MG
Hey whats up man I can't find the specs for this thing. All I know is that my box has .60cft and a mounting depth of 5 7/8" will they work in this box?
Member
Joined: Mar 2006
Posts: 14
Likes: 0
http://www.reaudio.com is the website you are looking for - and as a confirmation for the original poster - do NOT get sony xplods - any of the other choices that have been mentioned so far will out perform the xplods..
Senior Member
Joined: Mar 2006
Posts: 696
Likes: 0
From: Mishawaka, IN.
They don't call em the Mallet for nothing.
Check out the mounting depth--perfect fit.
Whether Cadence knows it or not, these things were made for a truck cab with a damn near perfect frequency response.
Size -- 10”
Voice Coil -- 2” Four-Layer
Impedance -- 4 Ohm Single Coil
Power Handling -- 250 Watts RMS 500 PEAK
Frequency Resp -- 20Hz - 1KHz
SPL @ 1W/1M -- 86dB
Mounting Depth -- 3.75”
TS PARAMETERS
Z=41.1209
Fs=34.2831
Pe=200
SPL=79.5856
Re=3.6
Le=2.4862
BL=11.2506
Xmax=0.00725
Cms=0
Qms=13.4082
Qes=1.2865
Qts=1.1738
Sd=3.6E-6
Vas=18.8571
Type=0
Check out the mounting depth--perfect fit.
Whether Cadence knows it or not, these things were made for a truck cab with a damn near perfect frequency response.
Size -- 10”
Voice Coil -- 2” Four-Layer
Impedance -- 4 Ohm Single Coil
Power Handling -- 250 Watts RMS 500 PEAK
Frequency Resp -- 20Hz - 1KHz
SPL @ 1W/1M -- 86dB
Mounting Depth -- 3.75”
TS PARAMETERS
Z=41.1209
Fs=34.2831
Pe=200
SPL=79.5856
Re=3.6
Le=2.4862
BL=11.2506
Xmax=0.00725
Cms=0
Qms=13.4082
Qes=1.2865
Qts=1.1738
Sd=3.6E-6
Vas=18.8571
Type=0