im looking to build a new motor for my show truck. im wanting to build another 302 but im wanting to get rid of the efi and electronics and carb it. my trans is brand new and its a E40D can i still use the E40D trans since its electronic do they make a computer to control the shifting? or do i need to go with a C6 or similar trans.

 

Not sure exactly how it works or how to run one, but I think this is what you're looking for:
http://www.fuelairspark.com/Products...ller%27-0.aspx

 

wow thats more than i want to spend lol i can get a used c6 or aod trans cheaper than that

 

I didn't see a price...lol. How much is it?

 

775 for the controller and 157 for the harness for the trans

 

775 for the controller and 157 for the harness for the trans

 

Going from EFI to carb is one of the biggest steps BACKWARDS people always want to do. Instead, try learning the system and how it works.

 

There's also
http://www.becontrols.com/products/tcs.htm
but they aren't cheap either
Why so anxious to ditch the EFI, especially on a 302 for which there is an unbelievable array of stuff available

 

its strickly a show truck, carb is cleaner not near as many wires, harness, etc. just like this guy brand new 08 pulled the factory motor and built a 383 stroker

 

Get a C6. An AOD won't hold up behind a built 302 unless you get it built too.