What axles were used on a 93 f150? And how much would a decent set of manual locking hubs be?

 

The axle itself are, I believe Dana/Spicer.

A set of standard WARN replacement hubs should sell for $90-125, premium WARN's for about $30 more. If you are replacing auto hubs you will need a hub nut kit as well $60-80

 

Rear axle is an 8.8 and the front is a Dana 44. Advance has Warn hubs right on the shelf for around $70.

 

a few of these trucks had the dana 28 in the front too. but most had the dana 44

 

I've never seen a fullsize with a Dana 28. Mostly those were for the Rangers, Bronco II, and Explorers. Every fullsize half ton truck I have ever seen since the 70s has a Dana 44 front axle, whether it is independent, or solid axle. I may be wrong, it's happened before, but I would have to see that one.

 

neither have i. but when i was looking up specs for my front ring and pinion on all-data it would only show stuff for a dana 28. then my dad went through a different section and he found the info we were looking for on my dana 44 but it still showed stuff for the 28. i would have to see one in person too.

 

You can't count on Alldata. At best is is Somedata. We use it at work. It is a joke.