95 5.0 engine swap
#1
95 5.0 engine swap
I need some help. I am trying to swap a 88 stang 5.0 ,into my 95 f150. The flex plate and auto overdrive flywheel bolt up perfectly only difference in the cranks I found that their is a 1/4 difference in where the pilot bearing goes. I machined it out and torque converter mates up fine. The problem is the bell housing and engine will not bolt up. If I start to tighten the bolts it will lock up the motor. Any help would be great. Thanks fastback1967@hotmail.com
#2
#4
#6
#7