New here!
#1
New here!
Hey all, I came from another Ford truck site (fte.com) and well their constant server problems on my end and a jerk admin named Ken (that would keep harassing me via email) made me come over here.
Anyway...I roll in my F-150 from time to time. It's an '88 ECSB, 302/AOD, XLT Lariat. Has pretty much every bolt-on available:
1. Hooker Long Tubes - 3" Carsound Cat - Magnaflow muffler
2. Built AOD - TransGo shift kit - Mustang WOT shift governor
3. BBK Fuel Pressure Regulator - New pumps/senders in boxes
4. ASP 3 piece Underdrive Pulley set - 130A alt - No Smog pump
5. FMS MAF Kit - ported '94 MAF with 89-93 electronics - FIPK
6. MSD 6AL - TFI Coil - FMS yellow 9mm wires - NGK UR44 plugs
7. Goodyear Hoses - Flow Kooler water pump - 180* thermo
8. Pioneer Premier 720 HU - PPI A200 amp - Polk DX speakers
I have a set of electric fans going on over Thanksgiving (as long as weather holds) and a big 200A alternator too! Then I plan to swap out my leaky power steering pump and hoses also. About three months ago I rebuilt the topend myself and all turned out well except my cam timing is off by a tooth...so I got a slight lope at idle! hahaha.
Also...in the spring I am getting the truck custom tuned via a wideband O2 by a buddy of mine. At that time I am going to get my Eaton posi and FMS 4.10:1 gears installed. I've had them for almost a year now!
Soon I need to install new springs and shocks, and install a set of Earl's stainless lines I still have in the box too. Probably Edelbrock IAS shocks, new replacment springs, 2" rear drop, Hellwig swaybars. I am thinking on running a 302 HO w/ GT-40 irons and a 214/220 cam while I begin gathering parts for a lil 408 w/ AFR-185 heads.
I have some pics I need to get hosted and let you guys check out my parts and stuff!
Glad to be here!
Anyway...I roll in my F-150 from time to time. It's an '88 ECSB, 302/AOD, XLT Lariat. Has pretty much every bolt-on available:
1. Hooker Long Tubes - 3" Carsound Cat - Magnaflow muffler
2. Built AOD - TransGo shift kit - Mustang WOT shift governor
3. BBK Fuel Pressure Regulator - New pumps/senders in boxes
4. ASP 3 piece Underdrive Pulley set - 130A alt - No Smog pump
5. FMS MAF Kit - ported '94 MAF with 89-93 electronics - FIPK
6. MSD 6AL - TFI Coil - FMS yellow 9mm wires - NGK UR44 plugs
7. Goodyear Hoses - Flow Kooler water pump - 180* thermo
8. Pioneer Premier 720 HU - PPI A200 amp - Polk DX speakers
I have a set of electric fans going on over Thanksgiving (as long as weather holds) and a big 200A alternator too! Then I plan to swap out my leaky power steering pump and hoses also. About three months ago I rebuilt the topend myself and all turned out well except my cam timing is off by a tooth...so I got a slight lope at idle! hahaha.
Also...in the spring I am getting the truck custom tuned via a wideband O2 by a buddy of mine. At that time I am going to get my Eaton posi and FMS 4.10:1 gears installed. I've had them for almost a year now!
Soon I need to install new springs and shocks, and install a set of Earl's stainless lines I still have in the box too. Probably Edelbrock IAS shocks, new replacment springs, 2" rear drop, Hellwig swaybars. I am thinking on running a 302 HO w/ GT-40 irons and a 214/220 cam while I begin gathering parts for a lil 408 w/ AFR-185 heads.
I have some pics I need to get hosted and let you guys check out my parts and stuff!
Glad to be here!
#3
#4
Awesome, best I have run with my truck is a 16.307@81.12, but I am waiting for some cold weather to see what it will really do.
Mods I have:
- Superchip
- March Power & Amp Underdrive Pulleys
- Custom made Air Intake
- Long Tube Headers
- Magnaflow Mufflers & X - Pipe No Cats
- Race Built 4R70W Tranny w/ 2200 Stall Converter
- FMS 3.73 Gears & Auburn Pro LS (Gonna get 4.10s in there soon)
Mods I have:
- Superchip
- March Power & Amp Underdrive Pulleys
- Custom made Air Intake
- Long Tube Headers
- Magnaflow Mufflers & X - Pipe No Cats
- Race Built 4R70W Tranny w/ 2200 Stall Converter
- FMS 3.73 Gears & Auburn Pro LS (Gonna get 4.10s in there soon)