So far, I've only put 107 rounds through it, and I have nothing but good things to say about it.

I shot 100 rounds of Remington UMC, and seven rounds of Speer Gold Dot +P with no failures. I even tried limpwristing to see if I could induce a failure, but couldn't.

Since the gun is nose heavy, the recoil isn't bad at all. Reacquiring the target is pretty easy, and I was pretty accurate at about 20 yards. It's light and slim and makes a great carry weapon when you want deep concealment. I bought a PistolWear PT-2 holster to use when running, and with the gun in the holster, it doesn't move at all. I went hiking this past weekend with it for about 5 hours and didn't even notice it was there.

I did put a Pachmayr grip on it before I shot it though. i think the bare grip may be a little harsh on the hands.

 

This thread is going to die here.

just bought a tumbler the other day tumbled my first 100+ rds of .308 for 8-10 hours man are they shiny. even took off that nasty black CETME marks

 

I will have a picture of my new SR556 up shortly as my dad is picking it up (i'm out of the country and our gun store has one right now, dont' want to wait for it when I get back), but this is the family:


That photo is missing my Remington 11-48 Autoloader and my M&P .40.

 

HAH!!!!!!! TELL EM!!!!

 

Here's a pic of one of my prize possessions. My dad brought this back with hime from the ETO WWII, and now it's mine.

 

Gonna try it again.

 

.Third time

 

Trying again.

 

Told you this would die here

Got into reloading. bought a dillion 550 + .223 dies and .308 dies along with all the other stuff ran about 750 press+ dies +Other stuff +8lbs of powder+1,000 small rifle and 1,000 large rifle primers







That table wasnt sturdy enough so i moved reloadin into the shop.


action shot. just about half way done with my 100 .308's


finished producted.


150 Horandy SP's over 46 grains of WC 846 * Military pulled 7.62X51MM powder* with CCI primers.

good feeling they all worked fine in the go no go gauge and are right about 2.78 in my cailper. cant wait to shoot them.

gotta love friends with CNC machines!




now i just need a barrel that is an inch longer!


My Mosin nagant is Tacicool!




Does anyone know where i can get the dimentions of a barret M82 style muzzle break?

 

nice. I am planning on reloading .223 myself. I am planning on using Redding dies, 69 & 77 grain Sierra match kings, reloader 15 or ar comp powder, and Remington br primers

can't wait!

 

i really like this WC 846 with no flash hider on the .223 it threw a 2-3 foot flame and i was able to hold a 2 inch group at 65 feet standing off hand.

i found a berdan primed .223 and broke my de cap pin also had a stuck case in the .308 die and bent the de cap pin. already had to go buy 2 new sets of dies!

 

nice reloader . Go Blue!! Ive got the same loader w strong mount. just received 5000 9mm once fired hulls and 4000 9mmm fmj's . I also reload 45acp and 223.



I did just pick up another Non-referb 54 Izzy sks . Its the second from the top. Then they were 4.

 

wow still the one with the gold blade tickles me. if you ever want to sell one send me a pm

 

i have got to stop looking at firearms for sale on gun websites....anyways here is my new baby.

550 for the gun 1 12 round mag and 1 5 round mag.



should be fun!

 

Finally got my AR completed. It is a DPMS lower, with UTG stock, and grip. Upper is from PK arms. It is Yankee Hill Machine barrel, upper, and free float tube, with front and rear flip up sights. Hopefully I will get it out the range this week, or next.