Sending unit on diff housing??

Thread Tools
 
Search this Thread
 
Old Sep 18, 2003 | 08:03 AM
  #1  
rksylves's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2003
Posts: 151
Likes: 0
From: Central Florida
Sending unit on diff housing??

I was installing my brand new Helwig rear anti-sway bar (very cool, btw) and I accidently knocked an electrical connector off of the differential housing. It was connected to what looked exactly like a temperature sending unit. It is mounted about 2 or 3 inches directly above the drive shaft in the diff housing. Luckily no damage was done and I simply plugged it back in.

Question though, does anyone know if it is a temperature sending unit?? Just got me curious.
 
Reply
Old Sep 18, 2003 | 12:40 PM
  #2  
gearmanx17's Avatar
Senior Member
Joined: Jul 2000
Posts: 541
Likes: 0
From: Indianapolis, IN USA
The sending unit is the pick-up for ABS system. Also picks-up signal off of tone ring on differential carrier, which tells the in dash speedometer the vehicle speed.
 
Reply
Old Sep 18, 2003 | 02:54 PM
  #3  
rksylves's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2003
Posts: 151
Likes: 0
From: Central Florida
Hey, thanks for the reply.

So the speedometer doesn't get speed info from the tranny anymore? That's interesting.
 
Reply
Old Sep 24, 2003 | 10:44 PM
  #4  
projectSHO89's Avatar
Senior Member
20 Year Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
Originally posted by rksylves
Hey, thanks for the reply.

So the speedometer doesn't get speed info from the tranny anymore? That's interesting.
Depends on the year.

Steve
 
Reply




All times are GMT -4. The time now is 11:00 PM.