cb mounting
#1
#3
I ordered a new cobra radio and plan on trying to mount it under the heating/cooling controls in the center stack. I was going to try to take out the flip-out ash-tray thing and stick it in there. I will have to do some trimming of plastic but unsure of how much. I'll update the list afterwards.
#4
#5
#7
Trending Topics
#8
Originally Posted by Raptor05121
ncpwt, do you have the CB wired to your Ford speakers or what cause I highly doubt you can still hear from the CB's internal.
The right side of the CB is a front firing speaker. I've never had to turn it above mid-way, even at highway speeds.
The actual install was relatively simple after I found the right double-din install kit. I'll dig up the actual part number and post it if anyone's interested.
#9
Originally Posted by ncpwt
The right side of the CB is a front firing speaker. I've never had to turn it above mid-way, even at highway speeds.
The actual install was relatively simple after I found the right double-din install kit. I'll dig up the actual part number and post it if anyone's interested.
The actual install was relatively simple after I found the right double-din install kit. I'll dig up the actual part number and post it if anyone's interested.
Tim C.
#10
Double-Din Install kits
http://www.bestkits.com/ViewImage.as...i/bkfmk542.jpg
or
http://www.circuitcity.com/ssm/Metra...oductDetail.do
or
http://www.circuitcity.com/ssm/Metra...oductDetail.do
Last edited by ncpwt; 03-22-2008 at 09:20 PM.
#11
#12
I have my Galaxy mounted to the very front of the console. Down on the front is a little pocket, I just used selftapping screws and used a wide velcro strap. The strap keeps it tight to the console instead of using the bracket. Then I just fished the wires under the console, using the power port on the back of the console for power and ran the coax under the carpet and out the back of the cab. Inside of the console I've got my linnear for getting it out over the radio rambos !
#13
Originally Posted by bigrigpapa
I have my Galaxy mounted to the very front of the console. Down on the front is a little pocket, I just used selftapping screws and used a wide velcro strap. The strap keeps it tight to the console instead of using the bracket. Then I just fished the wires under the console, using the power port on the back of the console for power and ran the coax under the carpet and out the back of the cab. Inside of the console I've got my linnear for getting it out over the radio rambos !