Troyer E-Fan
#107
Join Date: Dec 1997
Location: Windsor,Ontario,Canada
Posts: 9,417
Likes: 0
Received 11 Likes
on
10 Posts
It takes 15 to 20 HP to drive the clutch type fan that comes from the factory. With electric fans the heavy factory fan is removed so you get back that lost hp. If set up properly the electric fans only turn on when needed.
#110
Do not hold my feet to the fire on the exact numbers but you will get the general idea.
It takes 15 to 20 HP to drive the clutch type fan that comes from the factory. With electric fans the heavy factory fan is removed so you get back that lost hp. If set up properly the electric fans only turn on when needed.
It takes 15 to 20 HP to drive the clutch type fan that comes from the factory. With electric fans the heavy factory fan is removed so you get back that lost hp. If set up properly the electric fans only turn on when needed.
Just fyi ...
MGD
#111
Join Date: Dec 1997
Location: Windsor,Ontario,Canada
Posts: 9,417
Likes: 0
Received 11 Likes
on
10 Posts
To be fair and complete - here is another (opposing) viewpoint: https://www.f150online.com/forums/v8...c-fan-mod.html
Just fyi ...
MGD
Just fyi ...
MGD
#112
#116
I have the same question I got mine used from Mixedbreed and they did not come with any directions everything is put together. I think i know what wires in need to tap into. The little plug hanging off the computer, it should be the two wires on the outside right but i am not sure which is which :o