Is there a difference (Besides price) between the Accufab throttle bodies being offered by JDM, JL, and LFP? The pictures look the same on all three sites. JDM claims to be the only distributor for the one they are offering. Anybody have the story straight on this one?

JDM:

JLP

 

I'm pretty sure they are all the same. Buy one from the cheapest vendor and save some money.

 

where and how much? im getting a new blower and would definetly benifet from a t/b but dont want to fork over 450 for it.

 

wait a second, according to johnny lightnings web site the accufab tb is 459???? i though the accufabs were supposed to be hella cheaper. like 350??

 

J15BIG: If you don't think the $450 is worth it then...Don't buy the T/B...I will improve performance, but for $500 you could get a N20 system...Understand what I'm saying is its like the $1800 I paid for about 25HP ( if that much ) out of an Exhuast system...Not exactly "Bang for the Buck"...but The Exhuast sounds awesome and the T/B gives better Throttle response!!!


Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
410HP/503ft.lbs @ Normal Temp. w/o N2O
JL Logocaps w/Keychain
JL 3# Lower Pulley
Sean Hyland 2# Upper Pulley
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
JDM Eletric Fan
JDM 2” Drop Shackles
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )
NGK / TR6’s ( .040gap )
Hoosier DOT’s 28 x 10 x 16

 

i hear ya chikin....looks like im goin to have to start saving my pennys

 

i was lucky and bought a babolt x-mas special for $395, i like it alot, the get up and go is quicker

 

The $350 price is from accufab and has the cobra linkage. The tuners put on the L linkage.

 

The Accufab throttle body that JDM selling is a little different than the one Accubab is selling. Jim designed his unit and is having Accufab make it for him. JDM is the only one who can sell it for something like 6 months, then after that Accufab will be able to sell it too.

Iff you llok closely the JDM is wider and squarer than the accufab unit.

 

How about a $315 BABolt billet T/B? Engraved with the Lightning logo.

 

I'll take one for $315. Just steer me in the right direction where I can get one. Thanks,

Tim

 

This is what he's talking about.

https://www.f150online.com/forums/sh...threadid=75621

I'm gonna wait and see what prices do, over the next 6 months or so, with a little more competition. We could be seeing a more reasonable price soon. Maybe not. We'll see though.

 

Thanks!

 

A Nitrous system costs more than $500. Unless you get a used one. Try somewhere near $800+ bottle fills which can run $40+ on a 10lb bottle.
Just a dry NOS brand 05115 costs a little over $400. Then you have the gauges, purge, heater, blanket, remote opener, blow down tube, etc.

 

There isn't an exclusive on Accu-Fabs T/B's. I have been selling them for 6 weeks. Complete with new linkage lever arm that I provide. Also with a new TPS sensor upon your request.

Mark/LFP