Clear Tails
Senior Member
Joined: Dec 2000
Posts: 3,451
Likes: 0
From: Portland, Oregon. USA
They do bolt right in, however you will need shorter screws or a stack of washers. The 00 tail light screws are too long and will poke through to the inside if you don't cut them off or stack up some washer. Bulb connection are the same. Plug and play.
Senior Member
Joined: Apr 2000
Posts: 4,402
Likes: 0
From: On the side of the Road attempting to explain 135 miles per hour
ally,
just test fit the screws and add washers as needed.
**DO NOT** go too deep when you're screwing, you might cause undue pain or something......
just test fit the screws and add washers as needed.
**DO NOT** go too deep when you're screwing, you might cause undue pain or something......
