If you got a letter then it should have been done... unless it was already put in ford's OASIS network that it was done. check to see if you have the kit installed. If not, go back and get it done. Just don't take no for an answer.

 

they ran oasis on my vin and its clear, but i know i have the old style, but i never got a letter. Im gonna have to take it to the dealership i bought it from probably

 

As long as the work is done 'correctly', I don't have a problem with an 'experienced' mechanic using his knowledge to take a shortcut or two. (Though it sucks to have to come back, because some numbnut damaged something trying to take a bad shortcut, to pad his wallet.) I was just pointing out that it all evens up when you look at the big picture.

"Don't sweat the small stuff. It's all small stuff."

 

Hey guys thanks for the pic of what that recall is and the link to the site to find out if your truck needs it

I thought they had to do something under the dash but with the pic I pop the hood and saw that it was already done by the P.O. Even checked the recall site and was good to good there too Saved me a trip to the Ford House.

 

When by my local Ford dealer today. The service writer actually does the mod right there in the service line driveway!
After seeing the ugly piece of wiring apparatus, adding a few comments like "your not putting that on my truck", he entered the work as completed in their system and gave me the fusable link/harness and said I could install it myself. The fusable link/harness is all that came with the fix...no change-out of the actual sending unit!

I cut off all of the factory tags, tye-raps and was able to hide the new fusable link/harness back up under the brake fluid reservior/existing wiring next to the fuse panel. Connected the existing pigtail connector to the end of the harness/fusable link and the new pigtail connector that comes off of the new harness to my existing unit.
Now looks just like it did prior to the mod! Were good to go!

 

Sending units leak. The wiring should have been fused to begin with. It's a wiring issue from the beginning.