What is the best way to remove the factory cover? All those drop through clips need to come out? Is that the only thing holding it on?

 

Back off all of the Torx bolts which will release the c clamps and the rails will come right off.

Lew

 

Where are the torx bolts you speak of. I have not even got the cover off yet. Does the cover slide off or what? Do you have to pull those 2 spring clips down and slide it off.

 

Ohhh man. I never thought something like this would be so frustrating... I cant even get the soft cover off let alone the rails. anyone?????

 

OK..I'm gonna assume that you have the cover unhooked from the back and side rails and it's still connected to the front rail?

If that is the case, then slide the end of the cover out of the rounded channel at the front of the bed. That gets the cover off and out of the way.

Then you can go for all the rails.

 

I have nothing unhooked??????? All I have is to tabs that pull down in the back

 

Wow, Do I feel dumb now. The cover just pulls right off the truck. It has a small lip that is tucked under the channel. Took me 10 minutes to remove entire thing. Thanks

 

 

you selling the cover? condition?

 

Yes Austin I am selling the cover. It is in brand new condition. truck has 3400 miles on it. I tried to PM you but it does not work. PM me with an offer and its yours. Trust me, it will not last long.

 

Lol

 

I thought i was the only one !

 

If you have not sold the cover I am interested

Don

 

sorry guys but it sold yesterday. I just ordered my new ******** with the kick wing in the rear.

 

Hey Jeff....clean out your PM box.