Rob's black one is nice but I like mine better!

 

OK YOU WIN

WOO HOO
I love when you whip that pic out Suavy
There's no better looking S/C on the Planet Baby

 

Back at you bro!

Hey how far are you from Sal's place?

I'm headed to the east coast in the next two to three weeks.


Suavy

 

So what are we looking at for total boost w a 4# lower. I have stock block syndrome.

 

boost will depend on your exhaust, intake, and any belt slipping that you may or may not have. However, if you get the 2.6 upper with the MP you should see about 16 lb of boost.

Suavy

 

Thank you! I have seen that same pic in a MP ad and it put a big smile on my face to know it's mine!


Suavy

 

Give me 10 minutes, AND I'M THERE BRO
Man it would be great, could you see the 3 of us in one place together

 

Dont they come w/ 2.7 upper? What would that = w/4#lower?

Are these blowers ready to ship, or is there a wait of, say - 2 weeks....

Would still like to know what boost will be w/ stock, 4#, 6# lower using the 2.7 upper

This looks like the way to go for us stock block guys.

 

MP 2.7 upper and 4# lower equals approx 16-17 psi I have heard of guys making 19 in cold weather. It certainly is the way to go for stock block guys, then if you go with a built motor down the road these blowers love to be turned up!

JimIII

 

Hey, any of you guys swapping over to the MP have a ported eaton you want to sell? I'm looking for a ported eaton, because I also need to keep my stock blower intact!

 

Yes I can! I am gonna see how long it takes me to get tuned if I have some spare time I'm gonna make the run out there. How long will it take to get there from Elkton, MD


Suavy

 

Thats sweet as can be suavy real nice

 

Your coming out to MD are you? It would be nice to meet you if you have the time. I'm just right outside of Baltimore.

 

Whoa! 16-17 ---19 #'s on a stock block I can understand wanting to sell more built blocks

All kidding aside, What pulley combo will make 15# for us stock block guys? Are the upper pulleys available in 2,8-2,9-3.0 sizes, or will us 4#lower guys have to go to a 2# lower?

AND, Are They Ready To Ship???

 

The MP with the 2.7 upper it comes with and only a 4lb lower should get you about 14-15 psi. The MP really shines with rpm. So you can start small now, and then turn up the wick when you do a built motor down the line.

I just sent my last in stock unit out, but I can have them drop shipped from MP.