Just finished painting my calipers
#1
Just finished painting my calipers
Let me know what you think. This is on a Sonic Blue L.
Calipers were painted to have the "anodized" look with a home made lightning logo.
https://www.f150online.com/galleries...w.cfm?num=7429
Calipers were painted to have the "anodized" look with a home made lightning logo.
https://www.f150online.com/galleries...w.cfm?num=7429
#3
Logo
I searched around until I found a decent jpeg of the logo. Then I sized it to fit where I wanted it and printed it. Once it was printed I took and layed that piece of paper over some blue painters masking tape and trace the paper logo with an exacto. Then used another piece of tape and tranfered just the cutout onto it and applied it where I wanted.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
#7
Re: Logo
Originally posted by cglenn
I searched around until I found a decent jpeg of the logo. Then I sized it to fit where I wanted it and printed it. Once it was printed I took and layed that piece of paper over some blue painters masking tape and trace the paper logo with an exacto. Then used another piece of tape and tranfered just the cutout onto it and applied it where I wanted.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
I searched around until I found a decent jpeg of the logo. Then I sized it to fit where I wanted it and printed it. Once it was printed I took and layed that piece of paper over some blue painters masking tape and trace the paper logo with an exacto. Then used another piece of tape and tranfered just the cutout onto it and applied it where I wanted.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
No question is a dumb question, it might be dumb to those who already know the answer, but forgot that they did not know the answer once.
I have a Mac computer but I'm sure it will work on a PC. I went to your link, clicked on the picture to make it big then clicked on the pic again to open it in a new window, I'm not sure if you have to right click on a PC to do so, but once it opens in a new window all you have to do is to copy that new address and click on the IMG button on top where you post from and then paste that address into the pop up window for IMG and click OK and that should be it. Hope this helps.
Bert.:santa:
Trending Topics
#10
#11
#12
Re: Logo
Originally posted by cglenn
I searched around until I found a decent jpeg of the logo. Then I sized it to fit where I wanted it and printed it. Once it was printed I took and layed that piece of paper over some blue painters masking tape and trace the paper logo with an exacto. Then used another piece of tape and tranfered just the cutout onto it and applied it where I wanted.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
I searched around until I found a decent jpeg of the logo. Then I sized it to fit where I wanted it and printed it. Once it was printed I took and layed that piece of paper over some blue painters masking tape and trace the paper logo with an exacto. Then used another piece of tape and tranfered just the cutout onto it and applied it where I wanted.
How did you get the caliper picture to appear in the thread. Sorry for such a dumb question.
PEacE.............................
Jim
#13