Will finally dyno tomorrow......
Thread Starter
|
Senior Member
Joined: Apr 2004
Posts: 1,202
Likes: 0
From: Miami, FL
Originally posted by Bob Tompkins
What was your 1/8 mph?
Mine was 85.70 at full weight less hitch with 265lb driver in conditions similar to what you posted.
My tune was at 16deg timing at 11.8 A/F accross the board. The HP / TRQ number are in my sig for that tune. I am running a 6lb lower with stock (non ported) eaton seeing just at 14.5 psi at the shift.
Bob
What was your 1/8 mph?
Mine was 85.70 at full weight less hitch with 265lb driver in conditions similar to what you posted.
My tune was at 16deg timing at 11.8 A/F accross the board. The HP / TRQ number are in my sig for that tune. I am running a 6lb lower with stock (non ported) eaton seeing just at 14.5 psi at the shift.
Bob
Senior Member
Joined: Oct 2001
Posts: 1,018
Likes: 0
From: Florida
I only ran the 1/8 with the truck.
Time lslip as follows :
60 ft 1.89
330 ft 5.317
594et 7.651
1/8 et 8.17
Mph 85.70
How much boost are you seeing with 6lb lower and the port?
Please post your #'s after the tuning.
Bob
Time lslip as follows :
60 ft 1.89
330 ft 5.317
594et 7.651
1/8 et 8.17
Mph 85.70
How much boost are you seeing with 6lb lower and the port?
Please post your #'s after the tuning.
Bob
Thread Starter
|
Senior Member
Joined: Apr 2004
Posts: 1,202
Likes: 0
From: Miami, FL
Originally posted by Bob Tompkins
I only ran the 1/8 with the truck.
Time lslip as follows :
60 ft 1.89
330 ft 5.317
594et 7.651
1/8 et 8.17
Mph 85.70
How much boost are you seeing with 6lb lower and the port?
Please post your #'s after the tuning.
Bob
I only ran the 1/8 with the truck.
Time lslip as follows :
60 ft 1.89
330 ft 5.317
594et 7.651
1/8 et 8.17
Mph 85.70
How much boost are you seeing with 6lb lower and the port?
Please post your #'s after the tuning.
Bob
