That can be arrange Cracksmacker.

 

Beer day will be interesting, should I bring the wine?

 

Bring your extra Bondo.

 

You really want the rest of the can? I got about 1/3 left, it's yours if you want it.

 

Absolutely. I want to do that 3rd gauge in the center piece, and don't want to die using the spot putty.

Will's this week?

joe

 

4sure snizzle, I'll bring the mixing boards and some stir sticks. I want the mixing board back.

 

Is the G-Tech pod just a readout? I always thought to be accurate they ahd to be placed parallel to the ground for the accelerometers to work.

Nice pod btw.

 

The new G-Tech gauge can be set inplace, then they calibrate themselfs to that position. The don't have to be perfectly level at all, they just have to be at the same position once your turn the power back on once calibrated. Thanks

G-Tech gauge reads acceleration, braking, hp, power. With the new updated shareware the readout is even better and the pc software is now working correctly on the laptop.

 

New GTech Pass PC Software, if you don't follow the instructions correctly updating your firmware on the gauge, you can cause the gauge harm and it will need to be sent back to the company to be rest.