I searched but found very little. For those of you on the juice, I have 2 questions, and a request

1) Where are you guys mounting your bottles?
2) Do you keep your bottles in all the time, or only when racing?
3) Pics please.


Thanks

 

When i had my NX kit on my truck i had the bottle behind the pass seat. When i was out and about i left the bottle on so i could monitor the pressure and turn the warmer on if neccassary. Sorry no pics but it has all been taking off the truck. I mihg thave one or two pics ill just have to look around. I used the 6 disk changer bolts to mount the bottle so no holes or bolts were neccassary for the mounting. Dont even need a remote opener just reach over and your ready to rock.

 

i've got mine mounted in the bed, and leave it in all the time. check out my post over on www.lightningrodder.com do a search on zex wet kit under my name. i've got pic's of it mounted in my bed, with a custom board on the bottom so it would sit level. i've got the sylenoids mounted where rob had his, along with the purge next to it shooting up against my windshield.
hope this helps
later
chiz

 

never mind, i found it for you.
later
chiz

http://www.lightningrodder.com/compo...iewtopic&t=305

 

Chiz, what part of mississippi are u located. Im from northeast misssissippi and see alot of lightnings running round here.

 

In the bed.

Only when racing.

Sorry don't have any pics of the new set up!

 

Mickey_shouse

i live in clinton, and go to Mississippi College.

you ever come through here, let me know b/f you do, and maybe we can meat up and grab something to eat......if you stay around long enough on a friday night, we'll go out to beasley rd, and watch some races. usually about 100 people meat up and weight around till about 10, then go out there and race.
later
chiz

 

I have a thread I made showing where I installed everything with my NX wet kit.

https://www.f150online.com/forums/sh...hlight=nitrous

I leave my bottle in the bed pretty much 24/7. Used the 2 bolts in the back of the bed, on the drivers side and a peice of plywood as a bracket holder, then mounted the supplied brackets to it. Hope thats of some help to you. Any other questions feel free to ask.

 

I leave it in only when racing. I use Sals bracket that utilizes the two bolts in the rear of the bed, no drilling.

 

Anybody mount there's under the bed?

 

Bad idea. The exhaust will heat the nitrous up and could cause a few problems.

1) To high a pressure that can burst the disc.

2) To high a pressure and you lose the state of dense liquid where the possibilty to burn more fuel lies.