Did a search for rebuilding the Eaton Supercharger with no luck. I do rember reading about polishing the inside and plugging the noise reduction vents. Do any of you know where to get a rebuild kit and is it up gradeable?
I would love to squeze all the hp I can out of my factory unit.
I have a 4 lb. lower pulley and am looking to put a 6 lb on soon.

If any one could give me soom info and pic. that would be great!

Peace, Suavy[IMG]

https://www.f150online.com/galleries...3288-45425.jpg[/IMG]

 

I believe by March there will be a new Blower Case Available for our Eaton. I think this is a reasonable cost alternative as the case will be ported and flow tested.

The reason a new case was cast is because it is very time consuming to port these Blowers and get the proper increase in air flow.

Anyone interested can e mail me and I'll pass on info next month.

Jim

Disclaimer: This is not an AD and I'm not a Vendor

 

Interesting .... you have some mail

 

I am working in the same direction.I have basicly ruined one case to learn from it now the fun begins.Since none of the blower vendors are willing to help me .HINT HINT.Stan

 

Stan - if your trying to port out the blower casing, contact Bad as L, he gave me some good info.

 

Thanks for the info. I am verry interested in more info.

Peace, Suavy

jgonza94@ford.com