fx-r 3 retro
#46
Wait what? Haha I think I can tell you're serious because you aren't using your normal redneck (no offense) language.
Um idk about those questions, I'm not very electrical savvy.(i know my 120v + stuff and 24v for running your furnace and AC, but not that ha) Tell me what you think. Maybe PM me with details.. I wonder if they will let me send beer thru the mail? I'm not the type of guy that wants something for nothing.
Um idk about those questions, I'm not very electrical savvy.(i know my 120v + stuff and 24v for running your furnace and AC, but not that ha) Tell me what you think. Maybe PM me with details.. I wonder if they will let me send beer thru the mail? I'm not the type of guy that wants something for nothing.
Uh-Uh - this is a gift, and I'm an ol'-fashioned Canook Ukie (we takes our swag serious-like, lol) - yall just say 'thankee' and we's gudder'n gud, aight?. Besides - I'm th' wun whut offered, lol.
I'l git ye su'more info/details together in a PM soon, fer yer prerusin' pleasure
MGD
Patience, grasshoppa ...
#47
Hi.
Uh-Uh - this is a gift, and I'm an ol'-fashioned Canook Ukie (we takes our swag serious-like, lol) - yall just say 'thankee' and we's gudder'n gud, aight?. Besides - I'm th' wun whut offered, lol.
I'l git ye su'more info/details together in a PM soon, fer yer prerusin' pleasure
MGD
Patience, grasshoppa ...
Uh-Uh - this is a gift, and I'm an ol'-fashioned Canook Ukie (we takes our swag serious-like, lol) - yall just say 'thankee' and we's gudder'n gud, aight?. Besides - I'm th' wun whut offered, lol.
I'l git ye su'more info/details together in a PM soon, fer yer prerusin' pleasure
MGD
Patience, grasshoppa ...
Since you won't let me pay I'll make sure to at least pay it forward.
#48
more testing
https://www.f150online.com/forums/me...ot-precise.jpg https://www.f150online.com/forums/me...both-sides.jpg 50 ft and then 100+ you can see a big difference what i mean
Last edited by Jim Benson; 02-13-2014 at 10:19 PM.
#50
#51
i have not even sealed them up yet,i guess tomorrow i will try and take it back out of the housing, and tear it apart to see if i can find something wrong.i didn't think i would have to worry opening up a new projector. should i send it back? have you guys seen bad projectors before? i wonder how many people have even looked at there lights beyond 25ft setting, i may have never known if i had not checked them at a long distance.
#52
If you think the projector is bad, then give TRS a call. Their great customer service will run you thru bulb and ballasts swap, you already did that so tell them you did, and if that didn't fix it then they will probably send you a new projector.
Or you can try tuning the one projector to get the light output. Is the lens on the projector dirty?
Maybe order a really cheap used set of oem bulbs and see if that fixes it. It just seems from the picture you have no hot spot.
Here try this. Engage the high beam on both projectors and take note on where in the beam the center of the hotspot is. Take a picture too. If the hotspot is way high up in the beam then its a seating problem..
Or you can try tuning the one projector to get the light output. Is the lens on the projector dirty?
Maybe order a really cheap used set of oem bulbs and see if that fixes it. It just seems from the picture you have no hot spot.
Here try this. Engage the high beam on both projectors and take note on where in the beam the center of the hotspot is. Take a picture too. If the hotspot is way high up in the beam then its a seating problem..
#53
HI Jim - try swapping lenses. You *may* have gotten a Fresnel lens by mistake. Swapping will reveal that, or any other lens anomaly.
If it's still the same (and you ruled out the bulb and bulb seat), it's the projector. Get a new one under warranty. Once Atlanta starts moving again, of course
good luck!
MGD
If it's still the same (and you ruled out the bulb and bulb seat), it's the projector. Get a new one under warranty. Once Atlanta starts moving again, of course
good luck!
MGD
#54