Hello all,

So i just picked up a set of Depo headlights for my 97 f150.
I've read that you need to trim a little to get these lights to fit. I am fine with that part. what I don't understand is how to actually plug these lights in. I am terribly lost when I look at the diagram that came with it.

could someone please explain to me like I am 5 how to install these lights?

Thank you so much to whoever helps this lost soul!!

 

The high-beam projector requires that you need to trim a bit of the header panel that sits behind it for the projectors to fit back there.

Also, it should come with a PnP harness already set up to accept your 9007 socket

 

^ exactly. I have the same headlights and the wiring was pretty easy. The wiring diagram was self explanatory. Post a picture of what your diagram looks like and we can walk you through it..

 

Sorry for being MIA the past couple days, I'm getting over the flu.

I also feel like an idiot now. I was looking at the instructions and didn't investigate deeper into the box to find the 2 wire harnesses.

I will work on doing this switch this weekend and will keep you guys posted on the results.

Thanks for the replies!

Also, do you guys think a dremel would work best at cutting into the header panel?

 

Glad you figured it out.. Yes a dremel works perfect. That's what i used.