Raptor's LED Taillight Retrofit
#78
I like those tails!
You could do white reverse lights as well. Is that a single 194 at the bottom to light up the reflector?
Oh, and the video is live-
http://www.youtube.com/watch?v=kjR_KTYjDbA
I'm working on the driver side right now. I'm going to stay up all night and get them finished up. I have quite a bit of driving to do tomorrow and I've already hacked the wiring on my tail light harness.
Guys, let me know if you need any help! My Luxeon CHMSL starts next paycheck. If anyone is interested, I'm thinking of selling my old LED tails for $75+ Shipping.
You could do white reverse lights as well. Is that a single 194 at the bottom to light up the reflector?
Oh, and the video is live-
http://www.youtube.com/watch?v=kjR_KTYjDbA
I'm working on the driver side right now. I'm going to stay up all night and get them finished up. I have quite a bit of driving to do tomorrow and I've already hacked the wiring on my tail light harness.
Guys, let me know if you need any help! My Luxeon CHMSL starts next paycheck. If anyone is interested, I'm thinking of selling my old LED tails for $75+ Shipping.
Last edited by Raptor05121; 05-02-2011 at 11:17 PM.
#83
please post everything that you bought, and if you recommend different products for whatever reason.
#84
LEDs- http://cgi.ebay.com/ebaymotors/60-Ge...Q5fAccessories
I bought the parts for the PWM from DigiKey. Let me know when you are ready to shop, and I will send you a digital "cart" file. You upload this file to their site and it adds the appropriate items and the amount needed as necessary. Don't forget to calculate what resistors you need for the LEDs and add them manually.
#87
Sure can. My whole "learning curve" took 8-10 hours for my passenger side. My driver side has been under construction for about an hour now and I'm almost done. To do this to another set of styleside tails I would guesstimate no more than 3-4 hours start to finish. Other vehicles may take 5-10 hours.
Edit: I need more 22AWG wire!!!
Edit: I need more 22AWG wire!!!
Last edited by Raptor05121; 05-03-2011 at 01:03 AM.
#89
Both taillights assembled. In the morning when the curing process is complete, I will permanently mount them and hardwire the PWM under the back bumper.
Check PMs.
Check PMs.
Last edited by Raptor05121; 05-03-2011 at 02:16 AM.