ok i got a round fog light bumper for my truck. i want to add HIDs but i dont have a factory fog light harness. so there is my problem!!!! how can i wire a set of HIDS to a switch in my cab? can i? help PLZZZ

 

you need this:

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

 

So I plan on adding a fog bumper... I assume I need the oem fog switch and if I do the HIR bulbs... will this work? Or would I need to do something else?

 

IF your truck does not have the pigtails for foglights (they are usually clipped up under the bumper) you need the harness I linked above.

9011 -> harness -> OEM/aftermarket switch in cab

If you want I can do a wiring diagram

 

If you wouldn't mind... no rush bud at all

 

No problem, I don't go to work until 5

 

Pretty simple:

 

Thanks for doing that Alex! Much appreciated

 

No prob John

 

Alex I swear to everything on this earth that is holy you are the greatest!!!!! Thanks i~ill be doing this soon and I will upload pics to show u thanks again!

 

thanks and NP man. I just love helping people.

 

hey Alex those harnesses are on back order cuz they are closed for invetory will this one work????

http://cgi.ebay.com/ebaymotors/FOG-L...Q5fAccessories

 

Yes it will, but if you plan on running lights brighter than 45W you may be lacking. The wiring looks like its 16 gauge which is okay but better safe than sorry. If you do want to run hi-po lights, you can go to AutoZone and build your own harness with much thicker wiring (I usually say 14 gauge minimum, I'm running 8gau on my fogs). If your sticking with 45W or less, what you posted is fine.

Edit: I went to the OP and saw you were planning on going with HIDs, get this instead:

http://cgi.ebay.com/ebaymotors/880-9...Q5fAccessories

Its much cheaper and designed for HIDs in mind.