Arg.....wire harness's question....

Thread Tools
 
Search this Thread
 
Old Nov 22, 2009 | 09:48 AM
  #1  
Neurotoxin's Avatar
Thread Starter
|
Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Soo, Ontario
Arg.....wire harness's question....

I am I supposed to have two harness's? I just pulled out the stock single disk and there are two plug-in's in the back. A long rectangular one and a smaller rectangular one. I only have a harness for the larger rectangle one: http://www.crutchfield.com/p_1207055...s.html?tp=2977

Do I need another harness for the smaller plug-in?

Thanks!
 

Last edited by Neurotoxin; Nov 22, 2009 at 09:52 AM.
Reply
Old Nov 22, 2009 | 01:24 PM
  #2  
TJ05FX4's Avatar
Senior Member
Joined: Nov 2008
Posts: 655
Likes: 0
From: Austin TX
The large rectangle one has all the power wires, ground, speakers, etc so that's all you need if that's all you are powering.

The extra one is there in case you have the factory sub and want to use an aftermarket deck to power it. If you don't, then you only need the one harness you already bought.
 
Reply
Old Nov 22, 2009 | 08:21 PM
  #3  
Neurotoxin's Avatar
Thread Starter
|
Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Soo, Ontario
It's just seams odd that the small one was plugged into the back of the factory deck and I don't have a factory sub.....

I used the large one only an installed my Alpine. Everything works good.

Thanks
 
Reply
Old Nov 23, 2009 | 10:55 AM
  #4  
Sundevil2188's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,441
Likes: 0
From: Scottsdale, Arizona
Most trucks are already prewired for the sub. I think most guys have found it up by the seat brackets under the backs seat.
 
Reply
Old Nov 24, 2009 | 08:21 AM
  #5  
Neurotoxin's Avatar
Thread Starter
|
Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Soo, Ontario
Anyone happen to have a pic of the wiring that goes to no where? I'm wondering now cause I found 3 sets of RCA's and a remote wire behind the factory deck (the truck was bought used) leading to behind the rear seats.
 
Reply
Old Nov 24, 2009 | 11:47 AM
  #6  
TJ05FX4's Avatar
Senior Member
Joined: Nov 2008
Posts: 655
Likes: 0
From: Austin TX
Originally Posted by Neurotoxin
Anyone happen to have a pic of the wiring that goes to no where? I'm wondering now cause I found 3 sets of RCA's and a remote wire behind the factory deck (the truck was bought used) leading to behind the rear seats.
That would be for an aftermarket amp that someone would have used. The factory amp connection is just a smaller harness than the larger one that you used to power your aftermarket deck.
 
Reply
Old Nov 24, 2009 | 02:06 PM
  #7  
Neurotoxin's Avatar
Thread Starter
|
Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Soo, Ontario
Thanks!
 
Reply

Trending Topics

Old Dec 23, 2009 | 12:08 PM
  #8  
00F150Lariat's Avatar
Member
Joined: Nov 2009
Posts: 28
Likes: 0
that smaller plug also has the wiring in it for a stock cd changer.....
 
Reply
Old Jan 6, 2010 | 05:07 PM
  #9  
Fordtruckman88's Avatar
Suspended
Joined: Jul 2007
Posts: 344
Likes: 0
From: Illinois
im in the same boat because i just bought a brandmotion ipod connector and i cant find that small square plug and my ipod connector aint working so im gona try to see if thats the cause of it. My truck is a 2005 ford F-150 XL
 
Reply
Old Jan 11, 2010 | 11:24 AM
  #10  
phattacorider's Avatar
Technical Article Contributor
Joined: Jan 2009
Posts: 820
Likes: 0
From: Fayetteville, NC
Originally Posted by Fordtruckman88
im in the same boat because i just bought a brandmotion ipod connector and i cant find that small square plug and my ipod connector aint working so im gona try to see if thats the cause of it. My truck is a 2005 ford F-150 XL
The brandmotion ipod connector has to connect to the radio. The larger harness hooked up to your radio now is for power in, ground, ignition, speakers, dimmer, and I believe that's really it. The smaller harness (available only on certain F150 models) is for the satellite radio controller and mp3 input jack. If your radio does not have this smaller harness, then your ipod controller has nowhere to connect. You will need to obtain a compatible radio.
 
Reply




All times are GMT -4. The time now is 12:03 AM.