F150online Forums

Let's start over......

Thread Tools
 
Search this Thread
 
Old Jan 28, 2009 | 04:41 PM
Share
  #12766  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Originally Posted by Tumba
I think I need to clarify that. You Slide the yoke out of the transfer case, there is a seal there. The differential end is where you just unbolt the U Joint.
OK, where you pull the yolk out, won't there be a hole in the middle of that seal (the circumference of the shaft) that will allow water and dirt to get in and grease to slosh out?
 
__________________
Jim
Reply
0
Old Jan 28, 2009 | 05:29 PM
Share
  #12767  
Tumba's Avatar
Senior Member
Joined: Sep 2007
Posts: 1,512
Likes: 1
From: >wwOwww<
Originally Posted by Bluejay
OK, where you pull the yolk out, won't there be a hole in the middle of that seal (the circumference of the shaft) that will allow water and dirt to get in and grease to slosh out?

All the sticks out past the seal, is a splined shaft
 
Reply
0
Old Jan 28, 2009 | 05:33 PM
Share
  #12768  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Originally Posted by Tumba
All the sticks out past the seal, is a splined shaft
Ok, got it.
 
__________________
Jim
Reply
0
Old Jan 28, 2009 | 05:33 PM
Share
  #12769  
Stealth's Avatar
Thread Starter
|
Senior Member
Truck of the Month
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Almost dinner time.
 
Reply
0
Old Jan 28, 2009 | 05:55 PM
Share
  #12770  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Me too, think I'll stop at Myrtle's! Frito Pie time!
 
__________________
Jim
Reply
0
Old Jan 28, 2009 | 05:57 PM
Share
  #12771  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 158
From: DFW
Originally Posted by Zaairman
That's what hubs are for... Or is his truck stuck in 4x4?
You are correct, i work on All time 4wd land rovers all day, some times its hard to turn that mentalitly off :o
 
Reply
0
Old Jan 28, 2009 | 06:04 PM
Share
  #12772  
Jditta's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,814
Likes: 0
From: Northern Louisiana
hey pat, can you open the doors on the 2004-2008 f150s without the handles on?
 
Reply
0
Old Jan 28, 2009 | 06:05 PM
Share
  #12773  
ian51279's Avatar
Senior Member
Joined: Sep 2005
Posts: 3,017
Likes: 2
From: Decatur,AL
As of right now, we're expected to get 8" of snow Monday.
 
Reply
0
Old Jan 28, 2009 | 06:05 PM
Share
  #12774  
ian51279's Avatar
Senior Member
Joined: Sep 2005
Posts: 3,017
Likes: 2
From: Decatur,AL
Originally Posted by Jditta
hey pat, can you open the doors on the 2004-2008 f150s without the handles on?
You were supposed to take the driveshaft out, not the handles off!
 
Reply
0
Old Jan 28, 2009 | 06:07 PM
Share
  #12775  
Jditta's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,814
Likes: 0
From: Northern Louisiana
Originally Posted by ian51279
You were supposed to take the driveshaft out, not the handles off!
diff project.
 
Reply
0
Old Jan 28, 2009 | 06:07 PM
Share
  #12776  
Stealth's Avatar
Thread Starter
|
Senior Member
Truck of the Month
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Chicken breast, mashed potatoes, spinach, iced tea. Yum.
 
Reply
0
Old Jan 28, 2009 | 06:13 PM
Share
  #12777  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 158
From: DFW
Originally Posted by Jditta
hey pat, can you open the doors on the 2004-2008 f150s without the handles on?
yes, and can lock/unlock it from the outside, so make sure you set your alarm
 
Reply
0
Old Jan 28, 2009 | 06:41 PM
Share
  #12778  
Budha05STX's Avatar
Senior Member
Joined: Dec 2005
Posts: 1,530
Likes: 0
From: San Antonio, Tx
Originally Posted by ian51279
You were supposed to take the driveshaft out, not the handles off!
It's a LA thing.......you wouldn't understand.
 
Reply
0
Old Jan 28, 2009 | 06:44 PM
Share
  #12779  
ian51279's Avatar
Senior Member
Joined: Sep 2005
Posts: 3,017
Likes: 2
From: Decatur,AL
Originally Posted by Budha05STX
It's a LA thing.......you wouldn't understand.
Damn!! My bad.
 
Reply
0
Old Jan 28, 2009 | 06:52 PM
Share
  #12780  
Stealth's Avatar
Thread Starter
|
Senior Member
Truck of the Month
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Those doorhandles sure are tricky.
 
Reply
0



Advanced Search

All times are GMT -4. The time now is 03:46 PM.