Let's start over......
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
I usually just pull the tube off the front of the throttle body, and use brake clean sprayed on a rag, and wipe the TB from the front side. Its faster and has no risk of damaging the TB gasket by taking the TB off.
Just be gentle when you pull the blade down flat to reach behind it, and to clean the back side of the blade.
Just be gentle when you pull the blade down flat to reach behind it, and to clean the back side of the blade.
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Stand alone......haven't done winter wax coat yet...but I was going to try one of the CG's carnubas......
http://www.autogeek.net/chemical-guys-lava-wax.html
Or
http://www.autogeek.net/chemical-guy...paste-wax.html
Or what you mentioned looks good also..... http://www.autogeek.net/chemical-guy...nt-finish.html
http://www.autogeek.net/chemical-guys-lava-wax.html
Or
http://www.autogeek.net/chemical-guy...paste-wax.html
Or what you mentioned looks good also..... http://www.autogeek.net/chemical-guy...nt-finish.html