Let's start over......

Thread Tools
 
Search this Thread
 
Old Dec 6, 2011 | 07:56 AM
  #70381  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
 
Reply
Old Dec 6, 2011 | 08:03 AM
  #70382  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
 
Reply
Old Dec 6, 2011 | 08:18 AM
  #70383  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Morning.
 
Reply
Old Dec 6, 2011 | 08:22 AM
  #70384  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Howdy Dave!!! I can't believe ya'll call this cold up here.
 
Reply
Old Dec 6, 2011 | 08:27 AM
  #70385  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by 06F150STX
Howdy Dave!!! I can't believe ya'll call this cold up here.
7*F here this morning
 
Reply
Old Dec 6, 2011 | 08:39 AM
  #70386  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Originally Posted by 88racing
7*F here this morning
8* here but it feels like 38* or so back home.
 
Reply
Old Dec 6, 2011 | 08:51 AM
  #70387  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by 06F150STX
8* here but it feels like 38* or so back home.
You must be bundled up.....
 
Reply
Old Dec 6, 2011 | 08:53 AM
  #70388  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Originally Posted by 88racing
You must be bundled up.....
Na. That's not cold. Just have a jacket on.
 
Reply
Old Dec 6, 2011 | 09:09 AM
  #70389  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
Morning
It hasnt even been cold here either so far. This morning is coldest yet and we are only around the 25F mark. At least its starting to tighten up the ground a bit
 
Reply
Old Dec 6, 2011 | 09:12 AM
  #70390  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
34* and a nice breeze. It's a little chilly but no rain.
 
__________________
Jim
Reply
Old Dec 6, 2011 | 09:15 AM
  #70391  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
Little ice overnight, scraped Sarah's windshield before i left
 
Reply
Old Dec 6, 2011 | 09:18 AM
  #70392  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
Originally Posted by 88racing
Is the pulley size of your new alt a tad smaller than stock? Might be the reason for the loose belt.....

Too bad they don't stock the GB's in stores down there.....they do up here.....
maybe a tiny tiny bit smaller, they called it an overdrive pulley.

I may have you pick up a GB and send it my way then
 
Reply
Old Dec 6, 2011 | 09:27 AM
  #70393  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Patman
maybe a tiny tiny bit smaller, they called it an overdrive pulley.

I may have you pick up a GB and send it my way then
Before that route is taken.....try Amazon or summit racing.......they've got them cheaper than our parts stores.....
 
Reply
Old Dec 6, 2011 | 09:30 AM
  #70394  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by 06F150STX
Na. That's not cold. Just have a jacket on.
I'd be freezing my kiester off if alls I was wearing was a jacket....brrr.....
 
Reply
Old Dec 6, 2011 | 10:10 AM
  #70395  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
Think I might change up the front end of the truck. Instead of the light bar might put on a bull bar
 
Reply



All times are GMT -4. The time now is 10:38 AM.