Let's start over......
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Get it all moved?
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
yah i passed out, we still havent finished the headers on his truck, we tore his gasket on the passenger side. This has turned into on big pain in the ***.
going to work at kohls for the second to last time
going to work at kohls for the second to last time
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
I can't recall installing a set of headers that wasn't a huge pain.
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
the ones we did on my buddies 04 hemi ram went right in. a couple bolts behind the runners were hard, but good lord there is no clearance of any kind under/next to the engine on john's truck
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Most of the ones I installed were on Mustangs and seemed that there was always one or two holes that would not line up perfectly and the bolt would be most difficult to get started.
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
I washed and waxed my truck today. Cleaned the interior. Cleaned the engine and took it in for an oil change. It should feel pampered.
__________________
Jim
Jim