Let's start over......
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
I pulled the snorkle off earlier, on the intake. letting the computer reset now. Gping to see if that makes a noticable difference.
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Not yet. Having trouble getting the correct parts. May end up going with sch 40 pvc and grinding it down some to get it in the tube.
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
I've got to run to the bank in a bit, going by Lowes to do some more measuring, now that I can measure the inlet on the tube.
__________________
Jim
Jim
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Oh yeah, tomorrow I pick up Sleestak's bedrug, for a small nominal fee.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
I have only checked Lowes and Home Depot out here. I haven't had time to look much.
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Got the yard mowed, the truck washed and my DIY intake done.
Stealth, if you want to do your intake, I have plenty of PVC left. No sense in buying it. The other parts will cost you about $11.
Stealth, if you want to do your intake, I have plenty of PVC left. No sense in buying it. The other parts will cost you about $11.
__________________
Jim
Jim
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
__________________
Jim
Jim