04 F-250 Progress Tracker....
As for your update...
A new regulator and one of these will be here tomorrow

new fuel lines should be in today or tomorrow and i need to run out and get wire to make the harness for the new pump. other than that i have everything else ready to tear the remaining stock parts of the system out.
only stock parts of the fuel system will be the hard line for the return with a new section to fill in where the stock HFCM was and the tank.
A new regulator and one of these will be here tomorrow

new fuel lines should be in today or tomorrow and i need to run out and get wire to make the harness for the new pump. other than that i have everything else ready to tear the remaining stock parts of the system out.
only stock parts of the fuel system will be the hard line for the return with a new section to fill in where the stock HFCM was and the tank.
Lmao that video was awesome.
http://www.facebook.com/groups/315335141879048/ C is for cummings!!
http://www.facebook.com/groups/315335141879048/ C is for cummings!!
pump and new regulator are in my possession. have to stop at oriellys on the way to the shop and grab the circuit breaker i ordered for the pump wiring harness and then its off to PSE to drop all the stuff off and finish up the wiring harness so the pump and new filter setup can go on and the truck finally drive again


