Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

Stainless Works headers, which mufflers?

Thread Tools
 
Search this Thread
 
Old Feb 14, 2013 | 09:03 PM
  #1  
Low F350's Avatar
Thread Starter
|
Member
Joined: Oct 2012
Posts: 27
Likes: 0
From: GA
Stainless Works headers, which mufflers?

Im about to order a set of the stainless works headers with cats for my 2010 5.4. Just wanted to know which mufflers would sound good without being too loud. I will be running turndowns on the mufflers because of my lowering kit. I dont mind it being loud at highway speeds but around town it can get annoying. Also, leaning towards borla from good past experiences but I'm open to any suggestions. Thanks.
 
Reply
Old Feb 15, 2013 | 12:24 AM
  #2  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
The largest size Borla ProXS. I believe there is a 24" length body. Or a 21", not very sure.
 
Reply
Old Feb 15, 2013 | 07:35 AM
  #3  
Low F350's Avatar
Thread Starter
|
Member
Joined: Oct 2012
Posts: 27
Likes: 0
From: GA
Longest ones listed on their site are 19".
 
Reply
Old Feb 18, 2013 | 08:50 AM
  #4  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
Originally Posted by Low F350
Longest ones listed on their site are 19".
Well thats correct, I can't find anything greater than he 19" body until stepping into the Turbo XL line of mufflers. The 19" body should keep things subtle enough inside but still present.
 
Reply
Old Feb 18, 2013 | 07:44 PM
  #5  
Low F350's Avatar
Thread Starter
|
Member
Joined: Oct 2012
Posts: 27
Likes: 0
From: GA
Sounds like a plan. I'll try the 19's. Thanks.
 
Reply




All times are GMT -4. The time now is 06:28 AM.