SES light was on. Ran the code and it said it was the rear two sensors. Got under the truck to change them and found that the rear passenger side sensor wire had been ripped out of the sensor, most likely from bottoming out. The bad news is that the harness/connector was completely ripped out as well so now I just have the four dangling wires. Is there anywhere online that sells replacement harnesses/connectors so that I could splice it in and connect my new 02 sensor.

Thanks,

Dave

 

You could get extensions and cut the one end off and splice them in....
You'll have to solder the splice connections together....

 

Thanks 88. Will do. Soldering aint no thang.

 

^ There you go.