Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

Found a shop in Houston that...

Thread Tools
 
Search this Thread
 
Old Mar 26, 2010 | 10:46 PM
  #1  
jlouv420's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 32
Likes: 0
From: Houston, Texas
Found a shop in Houston that...

... uses stainless pipe with mandrel bends, puts the muffler on of my choice (most likely Magnaflow 14"), and installs tips of my choice for around $430 drive-out. I'm thinking this is a decent deal, right?

http://www.ripleysmufflerandbrakes.c...drel-bends.htm
 
Reply
Old Mar 26, 2010 | 10:58 PM
  #2  
jlovette's Avatar
Junior Member
Joined: May 2006
Posts: 9
Likes: 0
Seems like a pretty sweet deal to me and quite a bit cheaper than the Corsa system that I was planning on getting.
 
Reply
Old Mar 27, 2010 | 12:40 AM
  #3  
wutecht's Avatar
Senior Member
Joined: Nov 2009
Posts: 292
Likes: 0
From: Alvin Texas
Check with 1. brads muffler shop in alvin tx or 2. deer park muffler in deer park tx. deer park muffler did my true dual setup with bullets tips and new pipe for 400 less than everyone i called around.
 
Reply
Old Mar 27, 2010 | 09:44 AM
  #4  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
Stainless, and mandrel, $430, very good deal!
 
Reply
Old Mar 27, 2010 | 01:52 PM
  #5  
jlouv420's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 32
Likes: 0
From: Houston, Texas
Originally Posted by wutecht
Check with 1. brads muffler shop in alvin tx or 2. deer park muffler in deer park tx. deer park muffler did my true dual setup with bullets tips and new pipe for 400 less than everyone i called around.
Deer Park is not far from work, think I'll check them out too. Thanks wutecht.

Edit 'cause of Darren's comment: I thought it sounded like a good deal. A bolt-on kit runs that much or more. I think I would've already been to that shop but it requires planning 'cause it's kinda far from the hacienda.
 

Last edited by jlouv420; Mar 27, 2010 at 02:00 PM.
Reply
Old Mar 31, 2010 | 10:54 PM
  #6  
jlouv420's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 32
Likes: 0
From: Houston, Texas
Okay, so I called the other muffler shop. They say that it's better to go true dual with the X pipe for $450. He says it'll give me better performance and better sound. I have the 4.6L so would the SI/DO perform better or should I go true dual with an X pipe?
 
Reply
Old Mar 31, 2010 | 11:00 PM
  #7  
ddellwo's Avatar
Senior Member
Joined: Jun 2004
Posts: 2,823
Likes: 15
From: Houston, TX
I have a friend who had the Ripley's location on FM1960 put an exhaust system on his 2010 Mustang and he was very pleased with their service and the quality of their work.....
 
Reply

Trending Topics

Old Apr 1, 2010 | 12:06 AM
  #8  
wutecht's Avatar
Senior Member
Joined: Nov 2009
Posts: 292
Likes: 0
From: Alvin Texas
Originally Posted by jlouv420
Okay, so I called the other muffler shop. They say that it's better to go true dual with the X pipe for $450. He says it'll give me better performance and better sound. I have the 4.6L so would the SI/DO perform better or should I go true dual with an X pipe?
I say true dual, thats opening the exhaust up alot more than a si/do setup i was really suprised on what sound performance and even gas mileage (if i can keep my foot out of it) i got with true dual
 
Reply
Old Apr 1, 2010 | 02:35 AM
  #9  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
Originally Posted by wutecht
I say true dual, thats opening the exhaust up alot more than a si/do setup i was really suprised on what sound performance and even gas mileage (if i can keep my foot out of it) i got with true dual
It is nice huh?
 
Reply
Old Apr 1, 2010 | 11:55 AM
  #10  
abervintageman4's Avatar
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
ive talked to the owner of the ripleys on sawdust in the woodlands and he custom makes his own y pipes and such as well, seemed like a very knowledgable guy
 
Reply
Old Apr 1, 2010 | 12:19 PM
  #11  
FlashmasterK's Avatar
Senior Member
Joined: Mar 2010
Posts: 396
Likes: 0
From: Houston, TX
X2 on wutecht. I went to the same place in Deer park. I have a magnaflow SIDO and I got the whole thing for $200 out the door
 
Reply
Old Apr 1, 2010 | 12:34 PM
  #12  
blackedoutV6's Avatar
Senior Member
Joined: May 2008
Posts: 2,703
Likes: 1
From: Friendswood, Texas
Originally Posted by wutecht
Check with 1. brads muffler shop in alvin tx or 2. deer park muffler in deer park tx. deer park muffler did my true dual setup with bullets tips and new pipe for 400 less than everyone i called around.
neither one of those places does mandrel bends or uses stainless pipes
 
Reply
Old Apr 1, 2010 | 09:30 PM
  #13  
jlouv420's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 32
Likes: 0
From: Houston, Texas
Cool

Originally Posted by blackedoutV6
neither one of those places does mandrel bends or uses stainless pipes
Well, that's a deal-breaker. I didn't ask the Deer Park guy about that stuff when I was on the phone. Thanks for bringing it up.
 
Reply
Old Apr 1, 2010 | 09:41 PM
  #14  
wutecht's Avatar
Senior Member
Joined: Nov 2009
Posts: 292
Likes: 0
From: Alvin Texas
Originally Posted by DarrenWS6
It is nice huh?
hell yes it is i just passed my saftey inspection im thinking about puttin maggies on it or just cutting my mufflers off
 
Reply




All times are GMT -4. The time now is 05:37 PM.